WoodpeckerShips in 3 business days
Woodpecker Curing Light Replacement Heads · iLED · Purple
SKU 089-0056MFR# 17
Light
iLED
iLED$27.91
iLED PlusO-LightB-CureB-Cure PlusLED C
Color
Purple
Woodpecker iLED Plus Head Replacement. Fits white and purple Woodpecker iLED Plus Curing Lights.
Woodpecker Curing Light Replacement Heads is a curing light part from Woodpecker.
This page carries 6 light options: iLED, iLED Plus, O-Light, B-Cure, B-Cure Plus, LED C. This page carries 3 color options: Purple, White, Standard.
Find it on our Lab Equipment shelf, under Digital, Furnace & Curing Equipment.
Orders placed before 3 PM ET ship the same day when the item is on our shelf (otherwise within 3 business days), and ground shipping is free over $10.
Product
- Manufacturer
- Woodpecker
- Manufacturer #
- 17
- Item code
- 089-0056
Catalog path
- Marketplace
- Clinical
- Category
- Lab Equipment
- Subcategory
- Digital, Furnace & Curing Equipment
Ordering
- Status
- Ships in 3 business days
More from Digital, Furnace & Curing Equipment
Stocked in the same subcategory.
Questions
What is it used for?
Woodpecker iLED Plus Head Replacement.
Which light and color options are on this page?
This page carries 6 light options: iLED, iLED Plus, O-Light, B-Cure, B-Cure Plus, LED C. This page carries 3 color options: Purple, White, Standard. Pick one to see its price, part number and stock.
When does it ship?
In-stock orders placed before 3 PM ET ship the same day; anything not on our shelf ships within 3 business days.Ground shipping is free over $10.
About curing lights and parts
ISO 10650, the standard for light-curing units, covers halogen and LED lamps working between 380 and 515 nanometres. That standard is written for chairside units and states that it does not apply to units used in laboratory fabrication.
Denture processing is the means by which denture base material is polymerised into the form of a denture. Firing is the process of porcelain fusion, used in dentistry to produce porcelain restorations.
The FDA describes dental porcelain as a powder heated to a high temperature in an oven to produce a hard prosthesis with a glass-like finish.
How presses, curing units, furnaces and formers differ
- Flask & Hydraulic Presses — Holds the mould and presses the resin into it.
- Denture Curing Units — Polymerises the resin once it is in the mould.
- Furnace Units — Heats ceramics to firing temperature; wax elimination, the removal of wax from a mould, is also usually done by heat.
- Furnace Parts — The replaceable parts of a furnace, such as the muffle.
- Curing Lights & Parts — Polymerises resin with light of a set wavelength range.
- Vacuum Formers & Injectors — Shapes a softened sheet over a cast, or injects material into a closed mould, in place of packing a flask.
What to look at when choosing
Processing method: an injection method was developed to deal with the shrinkage of heat-cured acrylic in compression moulding.
Temperature: ISO 13078 exists because a furnace has to be calibrated; its method covers 600 to 1,050 degrees Celsius.
Cleaning between cases: the CDC notes that pressure pots and water baths are particularly susceptible to contamination and should be cleaned and disinfected between patients.
Sources: The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · FDA 21 CFR 872.6660, Porcelain powder for clinical use · Comparison of Conventional Pressure-packed and Injection Molding Processing Methods for an Acrylic Resin Denture (Int J Dent 2022) · ISO 13078:2013, Dental furnace: test method for temperature measurement with separate thermocouple · ISO 10650:2026, Powered polymerization activators · CDC, Guidelines for Infection Control in Dental Health-Care Settings, 2003 (MMWR 52 RR-17)
