
Detax Freeprint Gingiva 385 Gingival Mask Resin · 1 kg
Freeprint® gingiva 385 is Detax's light-curing resin for 3D-printed flexible gingival masks. It is made to reproduce functional gingival model segments in a digital workflow alongside Detax's Freeprint model resins, so a removable soft-tissue mask can be printed instead of poured. Detax states the material is elastic and tear-resistant, dimensionally stable, and does not shrink or age even after long storage.
What it is used for
- Flexible gingival masks for printed dental models
- Functional, removable soft-tissue segments on implant and crown-and-bridge models
- Soft-tissue simulation for checking emergence profile and margin design
Why labs choose it
- Tensile elongation above 90 % and tensile strength above 3 MPa — the mask comes off and goes back on without tearing
- Hardness above 70 Shore A, a realistic soft-tissue feel
- No shrinkage and no ageing, so the mask stays accurate on a model that is kept
- Designed to pair with Detax's Freeprint model resins in one digital workflow
- No unpleasant odour from the finished masks
Bottle sizes
Two sizes — pick the size above. The number is the Detax article number.
| Size | Article number |
|---|---|
| 500 g bottle | 02820 |
| 1 kg bottle | 02843 |
Details
- Colour: gingiva
- Detax product name: Freeprint gingiva 385
- Wavelength: Detax's 3D US Guide gives 380–405 nm for this material
- Classification: technical product — Detax does not classify Freeprint gingiva as a medical device, because the mask is part of a model and never goes in the mouth
- Post-processing: clean with isopropyl alcohol of at least 98 % purity, then post-cure in a validated curing unit
- Storage: dry, 15–28 °C / 59–82 °F, protected from light; keep the vat covered with its lid or a glass plate
Questions about this product
- What is Freeprint gingiva used for?
- Detax makes it for 3D printing flexible gingival masks for dental models — the removable soft-tissue segment on a printed model, reproduced in the digital workflow alongside Detax's Freeprint model resins.
- How soft and how stretchy is the printed mask?
- Detax gives a hardness above 70 Shore A, a tensile elongation above 90 % and a tensile strength above 3 MPa to ISO 527-1.
- Does the printed mask shrink or harden over time?
- Detax states that the material has superior dimensional stability with no shrinkage or ageing, and stays ductile even when stored over a long period.
- What sizes does Detax sell Freeprint gingiva in?
- Two, and both are on this page: a 500 g bottle, article 02820, and a 1000 g bottle, article 02843.
- Is Freeprint gingiva a medical device?
- No. Detax classifies it as a technical product in its 3D US Guide. The mask is part of a dental model and does not go into the mouth.
- What wavelength printer does Freeprint gingiva need?
- Detax's 3D US Guide gives a wavelength of 380 to 405 nm for Freeprint gingiva, which covers both the 385 nm and the 405 nm DLP printers in its validation matrix.
- Do the finished gingival masks smell?
- Detax states that there are no annoying or unpleasant odours from the fabricated gingival masks.
- How should Freeprint gingiva be stored?
- Detax says to store it dry at 15–28 °C / 59–82 °F and protected from light, because even slight light exposure can start polymerisation, and to cover the material in the vat with its lid or a glass plate.
Product
- Manufacturer
- Detax
- Manufacturer #
- 02843
- Item code
- 118-0026
Catalog path
- Marketplace
- Laboratory
- Category
- Digital Lab & CAD/CAM
- Subcategory
- 3D Printing Resins
Ordering
- Status
- Sold out
More from 3D Printing Resins
In stock in the same subcategory. Not the same product — check the specs before you swap.


About model resins
Model resin prints working models, the printed counterpart of a plaster cast. One study cited in a review found printed models ahead of traditional plaster models in accuracy and reproducibility.
A 3D printing resin is a liquid, light-sensitive resin that a printer hardens layer by layer. The glossary describes stereolithography in dentistry as the layering of light-reactive resin to make replicas of casts and devices. Printing in a vat of resin has become the benchmark in dental practice, and comes in three technologies: SLA, DLP and LCD.
When the resin is exposed to light of a specific wavelength, photoinitiators in it start the reaction that joins the monomers into polymer chains.
How the types of printing resin differ
- Model resin — For models that stay on the bench, not for parts worn in the mouth.
- Denture resin — For denture bases.
- Castable resin — A pattern for casting, not a part that is kept.
- Temporary crown resin — For crowns and bridges worn for a limited time.
- Surgical guide resin — For implant guides.
- Night guard resin — For removable occlusal devices such as splints.
- Permanent Crown & Bridge Resin — Filed for printed crowns and bridges that stay in place, where temporary crown resin is filed for provisionals.
The shelf also holds resin for permanent crowns and bridges; no source on the allowed list describes it yet, so it has no entry here.
What to look at when choosing a printing resin
Wavelength: photoinitiators are activated between 365 and 405 nm depending on the technology and the printer. A resin from one brand may not print on a printer from another brand if the wavelengths do not match.
After printing: the part is rinsed with a resin solvent to remove unpolymerised resin, dried, cured again in a light device, and its supports are removed. The rinse is generally 99% isopropyl alcohol.
Print settings: build orientation, layer thickness and post-curing all affect the printed result.
Sources: A Review of 3D Printing in Dentistry: Technologies, Affecting Factors, and Applications (Scanning 2021) · The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · Vat Photopolymerization 3D Printing in Dentistry: A Comprehensive Review of Actual Popular Technologies (Materials 2024) · Marginal and Internal Gap of Metal Copings Fabricated Using Three Types of Resin Patterns with Subtractive and Additive Technology (Materials 2022) · FDA 21 CFR 872.3770, Temporary crown and bridge resin





