
Detax Freeprint Denture Flex Flexible Partial Denture Resin, 1 kg · Pink-Transparent
Freeprint® denture flex is Detax's MDR-certified, light-curing resin for 3D-printed flexible partial dentures. Detax indicates it for the additive manufacture of orthodontic and dental objects such as flexible partial removable dentures, and describes the result as a partial with no metal clasps, a thin material structure and a natural look. It replaces milling and injection moulding in the partial-denture workflow.
What it is used for
- Flexible partial denture bases
- Removable partial dentures without metal clasps
- Thin-section partials where comfort and appearance matter
Why labs choose it
- No metal clasps — Detax leads with the natural appearance of a clasp-free partial
- Tensile strength above 45 MPa with elongation above 20 %, and a hardness above 78 Shore D
- Water sorption under 32 µg/mm³
- Precise 3D printing and a thin material structure for a comfortable, close fit
- Saves the milling and injection-moulding steps, with sustainable material use
- No MMA monomer and no phthalates; cleared by the FDA as a Class II device under 510(k) K252430
Colours
Two shades, each in a 1 kg bottle — pick the colour above. The number is the Detax article number.
| Colour | 1 kg bottle |
|---|---|
| Pink-transparent | 04701 |
| Clear | 04702 |
Details
- Wavelength: 385 nm DLP, with Detax parameter sets also published for the 405 nm Formlabs Form 4B
- Classification: ISO 20795-1 Type 4; FDA Class II, 510(k) K252430; EU MDR Class IIa, MDR certified; Health Canada Class II licence. Caution — US federal law restricts this device to sale by or on the order of a dentist
- Viscosity 1000–1700 mPas; biocompatibility fulfilled to ISO 10993-1; MR Safe per Detax
- Bottle size: 1000 g
- Printing: 100 µm layers
- Cleaning: two steps of 3 minutes each in isopropyl alcohol of at least 98 % purity in an ultrasonic bath — the second step in fresh alcohol — then post-cure in a validated curing unit
- Bonding: Detax specifies VITA VIONIC BOND as the bonding agent
- Do not use heat-based methods for disinfection or sterilisation, which can deform the denture
- Storage: dry, 15–28 °C / 59–82 °F, protected from light
Questions about this product
- What is Freeprint denture flex indicated for?
- Detax indicates it as a light-curable polymerizable resin, used with extra-oral curing light equipment, for the additive manufacture of orthodontic and dental objects such as flexible partial removable dentures.
- Which colours does Detax make Freeprint denture flex in?
- Two, both in 1000 g bottles: pink-transparent (article 04701) and clear (04702).
- Is Freeprint denture flex FDA cleared?
- Yes. Detax lists it in its 3D US Guide as an FDA Class II device under 510(k) number K252430. Detax also states that it is MDR certified in the EU, as Class IIa, and it holds a Health Canada Class II licence.
- Does a partial printed in denture flex need metal clasps?
- No. Detax states that no metal clasps are needed: precise 3D printing and a thin material structure give the fit and retention, which is what it describes as the natural look of the finished partial.
- What bonding agent does Detax specify?
- Detax specifies VITA VIONIC BOND as the bonding agent for finishing work on Freeprint denture flex.
- How is a printed denture flex partial cleaned before curing?
- Detax specifies two ultrasonic steps with isopropyl alcohol of at least 98 % purity: 3 minutes in reusable alcohol, then the supports are removed, then 3 minutes in fresh alcohol. After cleaning the surface must be dry and matt, not sticky or shiny.
- Which printers does Detax validate for Freeprint denture flex?
- Detax publishes parameter sets for Asiga Max, Max 2, PRO 4K and Ultra, Formlabs Form 4B, Heygears UltraCraft and Rapidshape D10+/D20+, printed at 100 µm layers. Curing units include Asiga Cure, Dentsply Sirona Digital Cure, Dreve PCU LED N2, Formlabs Form Cure 2nd generation, Heygears PCU Pro, NK Optik Otoflash G171 and 250/500, and Rapidshape RS cure.
- What is the difference between Freeprint denture flex and Freeprint denture impact?
- Denture flex is the flexible partial material: above 78 Shore D, tensile strength above 45 MPa, elongation above 20 %, in pink-transparent and clear, for clasp-free removable partials. Denture impact is the rigid, impact-resistant base resin for full and partial dentures, above 82 Shore D with a flexural modulus above 2100 MPa, in three gum shades.
Product
- Manufacturer
- Detax
- Manufacturer #
- 04701
- Item code
- 118-0013
Catalog path
- Marketplace
- Laboratory
- Category
- Digital Lab & CAD/CAM
- Subcategory
- 3D Printing Resins
Ordering
- Status
- In stock
More from 3D Printing Resins
Stocked in the same subcategory.


About denture resins
3D printing denture resin prints the resin base of a complete denture straight from the design file, without moulds, cutting tools or fixtures.
A 3D printing resin is a liquid, light-sensitive resin that a printer hardens layer by layer. The glossary describes stereolithography in dentistry as the layering of light-reactive resin to make replicas of casts and devices. Printing in a vat of resin has become the benchmark in dental practice, and comes in three technologies: SLA, DLP and LCD.
When the resin is exposed to light of a specific wavelength, photoinitiators in it start the reaction that joins the monomers into polymer chains.
How the types of printing resin differ
- Model resin — For models that stay on the bench, not for parts worn in the mouth.
- Denture resin — For denture bases.
- Castable resin — A pattern for casting, not a part that is kept.
- Temporary crown resin — For crowns and bridges worn for a limited time.
- Surgical guide resin — For implant guides.
- Night guard resin — For removable occlusal devices such as splints.
- Permanent Crown & Bridge Resin — Filed for printed crowns and bridges that stay in place, where temporary crown resin is filed for provisionals.
The shelf also holds resin for permanent crowns and bridges; no source on the allowed list describes it yet, so it has no entry here.
What to look at when choosing a printing resin
Wavelength: photoinitiators are activated between 365 and 405 nm depending on the technology and the printer. A resin from one brand may not print on a printer from another brand if the wavelengths do not match.
After printing: the part is rinsed with a resin solvent to remove unpolymerised resin, dried, cured again in a light device, and its supports are removed. The rinse is generally 99% isopropyl alcohol.
Print settings: build orientation, layer thickness and post-curing all affect the printed result.
Sources: A Review of 3D Printing in Dentistry: Technologies, Affecting Factors, and Applications (Scanning 2021) · The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · Vat Photopolymerization 3D Printing in Dentistry: A Comprehensive Review of Actual Popular Technologies (Materials 2024) · Marginal and Internal Gap of Metal Copings Fabricated Using Three Types of Resin Patterns with Subtractive and Additive Technology (Materials 2022) · FDA 21 CFR 872.3770, Temporary crown and bridge resin





