
Detax Freeprint Crown Permanent Crown Resin · B3 · 500 g
Freeprint® crown 385 is Detax's light-curing resin for 3D-printed permanent restorations. Detax states that the material is indicated as an indirect restorative for anterior and posterior teeth — permanent single crowns, inlays, onlays, veneers, denture teeth and long-term temporary bridges of up to three units with one pontic. The shade range follows the VITA classical guide, and translucency and opacity are matched shade by shade.
What it is used for
- Permanent single crowns, anterior and posterior, including occlusal surfaces
- Inlays, onlays and veneers
- Denture teeth for dental prostheses — bonded to a printed Freeprint denture, denture impact or denture flex base in the green state, with no separate bonding agent
- Long-term temporary bridges, up to three units with an intermediate pontic
Why labs choose it
- Nine shades close to the VITA classical guide, each with its own translucency and opacity setting
- Water absorption under 40 µg/mm³, which Detax links to its resistance to discoloration over time
- Flexural strength above 100 MPa and a flexural modulus above 2800 MPa to ISO 10477
- Detax states a wearing period of ten years or more for permanent crowns
- Cleared by the FDA as a Class II device under 510(k) K222877
Shades and bottle sizes
Eight shades, each in a 500 g and a 1 kg bottle — pick the shade and size above. The number is the Detax article number.
| Shade | 500 g | 1 kg |
|---|---|---|
| A1 | 04365 | 04364 |
| A2 | 04367 | 04366 |
| A3 | 04369 | 04368 |
| B1 | 04371 | 04370 |
| B3 | 04373 | 04372 |
| C2 | 04377 | 04376 |
| D3 | 04379 | 04378 |
| BL | 04375 | 04374 |
Details
- Wavelength: 385 nm DLP, with Detax parameter sets also published for 388 nm and 405 nm printers
- Regulatory: FDA Class II, 510(k) K222877; EU MDR Class IIa; Health Canada Class III licence. Caution — US federal law restricts this device to sale by or on the order of a dentist
- Biocompatibility fulfilled to ISO 10993-1; MR Safe per Detax
- Bottle sizes: 500 g and 1 kg
- Printing: 50 µm layers; minimum wall thickness 1.5 mm occlusal and circumferential, 1.0 mm cervical; connector cross-section at least 16 mm² for pontics
- Composition: (meth)acrylics, phosphine oxides and silanized dental glass; 20–40 % inorganic filler by mass at 1.5 µm particle size; viscosity 1400–2200 mPas
- Post-processing: clean with isopropyl alcohol of at least 98 % purity, then post-cure in a validated curing unit; biocompatibility is only guaranteed after complete polymerisation
- Storage: dry, 15–28 °C / 59–82 °F, protected from light
Questions about this product
- Is Freeprint crown approved for permanent crowns or only temporaries?
- Detax indicates it for both. The US instructions for use describe it as an indirect restorative for temporary or permanent restorations — crowns and bridges, inlays, onlays, veneers and full crown restorations — and the product page states a wearing period of ten years or more for permanent crowns.
- What shades does Detax make Freeprint crown in?
- Detax lists nine shades close to the VITA classical guide: A1, A2, A3, A3.5, B1, B3, C2, D3 and BL. Each shade comes in a 500 g and a 1 kg bottle.
- Is Freeprint crown FDA cleared?
- Yes. Detax lists Freeprint crown in its 3D US Guide as an FDA Class II device under 510(k) number K222877. It is also EU MDR Class IIa and holds a Health Canada Class III licence. US federal law restricts the device to sale by or on the order of a dentist.
- Which printers does Detax validate for Freeprint crown?
- Detax publishes validated parameter sets for Asiga Max, Max 2, PRO 4K and Ultra, Aidite Cameo CPD-100, Formlabs Form 4B and Form 4BL, Heygears UltraCraft A2D HD, Ivoclar PrograPrint PR5, LuxCreo FastPrint.io and iLux Pro Dental, Microlay Versus, Rapidshape ONE, D10+ to D40+, PRO20 and PRO30, Rayshape Edge E2 and Edge Mini, Shining 3D AccuFab CEL and L4D, and W2P SolFlex 250 UHD. Detax states the material is only approved on the devices named in its instructions for use.
- What layer thickness and wall thickness does Detax specify?
- Detax specifies 50 µm layers, a minimum wall thickness of 1.5 mm occlusally and circumferentially and 1.0 mm cervically, and a connector cross-section of at least 16 mm² for pontics.
- How do I bond printed denture teeth to a printed denture base?
- Detax says to leave the cleaned base and teeth in the green, uncured state, seat the teeth in the printed sockets, apply liquid Freeprint denture, denture impact or denture flex into the sockets with a brush or syringe, flash 400 times under nitrogen in an Otoflash G171, then post-cure the assembled denture with 2 x 1800 flashes under nitrogen.
- How should Freeprint crown be stored and how long can it stay in the vat?
- Detax says to store it dry at 15–28 °C / 59–82 °F and protected from light, because even slight light exposure can start polymerisation. The resin may stay in the printer vat for a maximum of 14 days or 10 print cycles, and resin taken out of the vat must never be poured back into the bottle.
- What is the difference between Freeprint crown and Freeprint temp?
- Freeprint crown is Detax's permanent restorative, cleared as a Class II device, with a flexural modulus above 2800 MPa and nine shades. Freeprint temp is the temporary material: Detax indicates it for restorations worn less than 30 days in the mouth and offers it in shades A1, A2 and A3.
Product
- Manufacturer
- Detax
- Manufacturer #
- 04373
- Item code
- 118-0035
Catalog path
- Marketplace
- Laboratory
- Category
- Digital Lab & CAD/CAM
- Subcategory
- 3D Printing Resins
Ordering
- Status
- Sold out
More from 3D Printing Resins
In stock in the same subcategory. Not the same product — check the specs before you swap.


About permanent crown and bridge resin
Permanent crown and bridge resin is the 3D printing resin filed for printed crowns, ceramic nanohybrid resins among them, in 250 g and 500 g bottles.
A 3D printing resin is a liquid, light-sensitive resin that a printer hardens layer by layer. The glossary describes stereolithography in dentistry as the layering of light-reactive resin to make replicas of casts and devices. Printing in a vat of resin has become the benchmark in dental practice, and comes in three technologies: SLA, DLP and LCD.
When the resin is exposed to light of a specific wavelength, photoinitiators in it start the reaction that joins the monomers into polymer chains.
How the types of printing resin differ
- Model resin — For models that stay on the bench, not for parts worn in the mouth.
- Denture resin — For denture bases.
- Castable resin — A pattern for casting, not a part that is kept.
- Temporary crown resin — For crowns and bridges worn for a limited time.
- Surgical guide resin — For implant guides.
- Night guard resin — For removable occlusal devices such as splints.
- Permanent Crown & Bridge Resin — Filed for printed crowns and bridges that stay in place, where temporary crown resin is filed for provisionals.
The shelf also holds resin for permanent crowns and bridges; no source on the allowed list describes it yet, so it has no entry here.
What to look at when choosing a printing resin
Wavelength: photoinitiators are activated between 365 and 405 nm depending on the technology and the printer. A resin from one brand may not print on a printer from another brand if the wavelengths do not match.
After printing: the part is rinsed with a resin solvent to remove unpolymerised resin, dried, cured again in a light device, and its supports are removed. The rinse is generally 99% isopropyl alcohol.
Print settings: build orientation, layer thickness and post-curing all affect the printed result.
Sources: A Review of 3D Printing in Dentistry: Technologies, Affecting Factors, and Applications (Scanning 2021) · The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · Vat Photopolymerization 3D Printing in Dentistry: A Comprehensive Review of Actual Popular Technologies (Materials 2024) · Marginal and Internal Gap of Metal Copings Fabricated Using Three Types of Resin Patterns with Subtractive and Additive Technology (Materials 2022) · FDA 21 CFR 872.3770, Temporary crown and bridge resin





