Skip to content
Free shipping over $10Order by 3 PM ET, ships the same day 30-day returns, no restocking fee
(814) 299-9937 · Mon–Fri 9am–5pm ET
Sold out
Detax Freeprint Cast 2.0 385 Castable Resin
DetaxSold out

Detax Freeprint Cast D 2.0 385 Castable Resin · 1 kg

SKU 118-0025MFR# 02632
$178.00 · Sold out
Size 1 kg
1 kg$178.00 500 g$89.00

Freeprint® cast 2.0 385 is Detax's light-curing, burn-out resin for 3D-printed casting patterns. Detax indicates it for the fabrication of residue-free combustible cast objects for precision casting by the DLP process. The pattern is invested in a phosphate-bonded standard investment, burns out at about 800 °C and leaves under 0.1 % combustion residue — even at large volumes.

What it is used for

  • Cast patterns for dental precision casting
  • Partial denture frameworks, including filigree designs
  • Any pattern that must burn out without residue before casting

Why labs choose it

  • Residue-free burn-out: under 0.1 % combustion residue, for clean castings
  • Low shrinkage and warp-free, dimensionally stable patterns — Detax calls this out for filigree partial cast frameworks
  • Precise reproduction of the finest surface structures
  • Low viscosity for low material consumption and quicker cleaning
  • Flexural strength above 70 MPa and a flexural modulus above 1700 MPa to ISO 178, so patterns survive handling and investing

Bottle sizes

Two sizes — pick the size above. The number is the Detax article number.

Size Article number
500 g bottle 02548
1 kg bottle 02632

Details

  • Colour: red (Detax's 3D US Guide calls it red-transparent)
  • Detax product name: Freeprint cast 2.0 385
  • Wavelength: Detax's instructions for use describe it as a resin for DLP printers with a 385 nm UV LED; its 3D US Guide gives the range as 380–405 nm and publishes 405 nm parameter sets for Microlay Eve Pro, Phrozen Sonic 4K 2022 and Shining 3D AccuFab D1s and L4D
  • Classification: technical product — Detax does not classify Freeprint cast 2.0 as a medical device
  • Investing: phosphate-bonded standard investment; preheat to approximately 800 °C / 1472 °F for 30–45 minutes depending on mould size, regardless of the final casting temperature
  • Bakeout: 1 hour at 800 °C; combustion residue under 0.1 %
  • Repairs: a printed pattern can be corrected or repaired with Detax easyform gel LC
  • Post-processing: clean with isopropyl alcohol of at least 98 % purity, then post-cure in a validated curing unit
  • Storage: dry, 15–28 °C / 59–82 °F, protected from light
Questions about this product
What is Freeprint cast 2.0 used for?
Detax indicates it for the fabrication of residue-free combustible cast objects for precision casting technology by the DLP process — the 3D-printed pattern that is invested and burned out before casting.
How much residue is left after burn-out?
Detax gives a combustion residue of less than 0.1 %, after a bakeout of 1 hour at 800 °C.
What investment and preheating does Detax recommend?
Detax says phosphate-bonded standard investment compound can be used, and that a preheating temperature of approximately 800 °C / 1472 °F should be held for about 30 to 45 minutes depending on the size of the casting mould, regardless of the final casting temperature.
Is Freeprint cast 2.0 a medical device?
No. Detax classifies it as a technical product in its 3D US Guide, not as a medical device, because the printed object is a casting pattern and never goes in the mouth.
What sizes does Detax sell Freeprint cast 2.0 in?
Two, and both are on this page: a 500 g bottle, article 02548, and a 1000 g bottle, article 02632.
What colour is Freeprint cast 2.0?
Red. Detax calls it red on the product page and red-transparent in its 3D US Guide.
Can a printed pattern be repaired before investing?
Yes. Detax states that a correction or repair after printing is possible with easyform gel LC.
Which printers does Detax validate for Freeprint cast 2.0?
Detax publishes parameter sets for Asiga Max, Max 2, Pico 2, PRO 2, PRO 4K and Ultra, Ivoclar PrograPrint PR5, Microlay Eve Pro and Versus, Miicraft Alpha, Prime Series and Ultra Series, Phrozen Sonic 4K 2022, Rapidshape D20+ to D40+, Shining 3D AccuFab D1s and L4D, and Way2Production SolFlex Series.

Product

Manufacturer
Detax
Manufacturer #
02632
Item code
118-0025

Catalog path

Marketplace
Laboratory

Ordering

Status
Sold out

More from 3D Printing Resins

In stock in the same subcategory. Not the same product — check the specs before you swap.

View all 77
AiZir Zirconia Disc, 98 mm
Aidite
AiZir Zirconia Disc, 98 mm
8 thicknesses · 19 shades
In stock
2,646 sold this month
from $80.00
Keystone KeyPrint KeySplint 3D Printing Resin
Keystone Industries
Keystone KeyPrint KeySplint 3D Printing Resin
2 types · 2 colors · 2 sizes
In stock
22 sold this month
from $214.17
Keystone KeyPrint KeyModel Ultra 3D Printing Resin
Keystone Industries
Keystone KeyPrint KeyModel Ultra 3D Printing Resin
2 colors · 2 sizes
In stock
13 sold this month
from $73.80
HDI-Denu Easy Scan Dental Model Scanning Spray, 250g
HDI-DENU
Easy Scan Dental Model Scanning Spray, 250g
013-0021
In stock
$50.00
Bego VarseoSmile Crown plus 3D Printing Resin, 250 g
Bego
VarseoSmile Crown plus 3D Printing Resin, 250 g
8 shades
In stock
from $330.59

About castable resins

A castable resin prints the pattern that is then cast in metal by the lost-wax technique, in the place of a wax pattern. Resin patterns are made both by milling and by 3D printing.

A 3D printing resin is a liquid, light-sensitive resin that a printer hardens layer by layer. The glossary describes stereolithography in dentistry as the layering of light-reactive resin to make replicas of casts and devices. Printing in a vat of resin has become the benchmark in dental practice, and comes in three technologies: SLA, DLP and LCD.

When the resin is exposed to light of a specific wavelength, photoinitiators in it start the reaction that joins the monomers into polymer chains.

How the types of printing resin differ

The shelf also holds resin for permanent crowns and bridges; no source on the allowed list describes it yet, so it has no entry here.

What to look at when choosing a printing resin

Wavelength: photoinitiators are activated between 365 and 405 nm depending on the technology and the printer. A resin from one brand may not print on a printer from another brand if the wavelengths do not match.

After printing: the part is rinsed with a resin solvent to remove unpolymerised resin, dried, cured again in a light device, and its supports are removed. The rinse is generally 99% isopropyl alcohol.

Print settings: build orientation, layer thickness and post-curing all affect the printed result.

Sources: A Review of 3D Printing in Dentistry: Technologies, Affecting Factors, and Applications (Scanning 2021) · The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · Vat Photopolymerization 3D Printing in Dentistry: A Comprehensive Review of Actual Popular Technologies (Materials 2024) · Marginal and Internal Gap of Metal Copings Fabricated Using Three Types of Resin Patterns with Subtractive and Additive Technology (Materials 2022) · FDA 21 CFR 872.3770, Temporary crown and bridge resin