Skip to content
Free shipping over $10Order by 3 PM ET, ships the same day 30-day returns, no restocking fee
(814) 299-9937 · Mon–Fri 9am–5pm ET
Dreve PCU vario 160 Post-Curing Unit
DreveSpecial order

Dreve PCU vario 160 Post-Curing Unit

SKU 120-0002MFR# 4319S

LED post-curing unit for 3D printed parts. The control panel and the vacuum module are separate modules, each with its Modbus cable.

For use by a dental professional.

Product

Manufacturer
Dreve
Manufacturer #
4319S
Item code
120-0002

Catalog path

Marketplace
Laboratory

Ordering

Status
Special order

More from Digital, Furnace & Curing Equipment

Stocked in the same subcategory.

View all 45
Keystone EPR Burning Alcohol (Denatured Ethanol), 1 Quart
Keystone Industries
Keystone EPR Burning Alcohol (Denatured Ethanol), 1 Quart
010-3989
In stock
$10.00
Vaniman Dust Collector Filter Bags
Vaniman
Dust Collector Filter Bags
2 packs
In stock
from $47.00
RMH3 Dental Round Vibrator
RMH3 Dental
Round Vibrator
105-0009
In stock
$71.18
Lang Aquapres High Capacity Hydraulic Pressure Curing Unit
Lang Dental
Lang Aquapres High Capacity Hydraulic Pressure Curing Unit
045-0057
In stock
$337.23
GT Sonic Ultrasonic Cleaner VGT-800, 110V
GT Sonic
Ultrasonic Cleaner VGT-800, 110V
022-0003
In stock
$66.00

About curing lights and parts

ISO 10650, the standard for light-curing units, covers halogen and LED lamps working between 380 and 515 nanometres. That standard is written for chairside units and states that it does not apply to units used in laboratory fabrication.

Denture processing is the means by which denture base material is polymerised into the form of a denture. Firing is the process of porcelain fusion, used in dentistry to produce porcelain restorations.

The FDA describes dental porcelain as a powder heated to a high temperature in an oven to produce a hard prosthesis with a glass-like finish.

How presses, curing units, furnaces and formers differ
  • Flask & Hydraulic Presses — Holds the mould and presses the resin into it.
  • Denture Curing Units — Polymerises the resin once it is in the mould.
  • Furnace Units — Heats ceramics to firing temperature; wax elimination, the removal of wax from a mould, is also usually done by heat.
  • Furnace Parts — The replaceable parts of a furnace, such as the muffle.
  • Curing Lights & Parts — Polymerises resin with light of a set wavelength range.
  • Vacuum Formers & Injectors — Shapes a softened sheet over a cast, or injects material into a closed mould, in place of packing a flask.
  • General Repair & Replacement Parts — Burner parts, a curing unit spigot, a halogen bulb and press parts.
What to look at when choosing

Processing method: an injection method was developed to deal with the shrinkage of heat-cured acrylic in compression moulding.

Temperature: ISO 13078 exists because a furnace has to be calibrated; its method covers 600 to 1,050 degrees Celsius.

Cleaning between cases: the CDC notes that pressure pots and water baths are particularly susceptible to contamination and should be cleaned and disinfected between patients.

Sources: The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · FDA 21 CFR 872.6660, Porcelain powder for clinical use · Comparison of Conventional Pressure-packed and Injection Molding Processing Methods for an Acrylic Resin Denture (Int J Dent 2022) · ISO 13078:2013, Dental furnace: test method for temperature measurement with separate thermocouple · ISO 10650:2026, Powered polymerization activators · CDC, Guidelines for Infection Control in Dental Health-Care Settings, 2003 (MMWR 52 RR-17)