Sold out

DetaxSold out
Detax Freeprint Model T Thermoforming Model Resin · 1 kg
SKU 118-0032MFR# 02332
$178.00
· Sold out
Size
1 kg
1 kg$178.00
Freeprint® model T 385 is Detax's light-curing resin for 3D-printed models that will be thermoformed. Detax created it for dental models made for the thermoforming technique, with precise detail reproduction, maximum surface hardness and edge stability. It takes a thermoforming sheet working temperature of up to 195 °C, and its intrinsic stability is high enough that hollow master models can be printed.
What it is used for
- Models that will be thermoformed — aligner, splint, retainer and bleaching tray blanks
- Hollow master models, which use less resin and heat through faster
- Working models that must hold their shape under a hot thermoforming sheet
Why labs choose it
- Working temperature for thermoforming sheets up to 195 °C
- Maximum surface hardness and edge strength — hardness above 83 Shore D
- Dimensionally stable under the press, so the formed appliance fits the model it came off
- Pronounced intrinsic stability allows hollow master models
- Low viscosity for considerably easier cleaning and lower material consumption
- Flexural strength above 80 MPa and a flexural modulus above 1700 MPa to ISO 178
Details
- Colour: light blue
- Detax article number: 02332 — Freeprint model T 385, 1000 g bottle (Detax also lists a 5 kg Ecobag, article 04322)
- Wavelength: Detax's 3D US Guide gives 380–405 nm for this material
- Classification: technical product — Detax does not classify its model resins as medical devices, because a dental model is not placed in the mouth
- Working temperature for thermoforming sheets: up to 195 °C
- Post-processing: clean with isopropyl alcohol of at least 98 % purity, then post-cure in a validated curing unit
- Storage: dry, 15–28 °C / 59–82 °F, protected from light; keep the vat covered with its lid or a glass plate
Questions about this product
- What is Freeprint model T used for?
- Detax describes it as a light-curing formulation for 3D printing thermoforming models — dental models made for the thermoforming technique, with precise reproduction of details, maximum surface hardness and edge stability.
- How hot can a model T model be thermoformed at?
- Detax gives a working temperature for thermoforming sheets of up to 195 °C.
- Can I print hollow master models in it?
- Yes. Detax states that the pronounced intrinsic stability of the material also allows the fabrication of hollow master models.
- What colour is Freeprint model T?
- Light blue. Detax lists it in one colour only.
- Is Freeprint model T a medical device?
- No. Detax classifies its model resins as technical products in its 3D US Guide, because a dental model is not placed in the mouth.
- What wavelength printer does it need?
- Detax's 3D US Guide gives a wavelength of 380 to 405 nm for Freeprint model T, which covers both the 385 nm and the 405 nm DLP printers in Detax's dental validation matrix.
- What pack sizes does Detax offer?
- Detax lists a 1000 g bottle (article 02332) and a 5 kg Ecobag (article 04322). This page is the 1 kg bottle.
- What is the difference between Freeprint model T and Freeprint model 2.0?
- Model T is the thermoforming resin: light blue, hardness above 83 Shore D, rated for sheets up to 195 °C and stable enough for hollow master models. Model 2.0 is the general model resin in five opaque colours for master, working, situation and control models, with Detax giving its hardness as above 80 Shore D on the product page.
Product
- Manufacturer
- Detax
- Manufacturer #
- 02332
- Item code
- 118-0032
Catalog path
- Marketplace
- Laboratory
- Category
- Digital Lab & CAD/CAM
- Subcategory
- 3D Printing Resins
Ordering
- Status
- Sold out
Other in-stock items in 3D Printing Resins
Not the same product — check the specs before you swap.

Keystone Industries
Keystone KeyPrint KeySplint 3D Printing Resin
In stock
20 sold this monthfrom $214.17

Keystone Industries
Keystone KeyPrint KeyModel Ultra 3D Printing Resin
In stock
12 sold this monthfrom $73.80





