BegoShips in 3 business days
Bego Miditherm Preheating Furnace Parts · Thermocouples for Miditherm 100 & 200 — 2/pack
SKU 011-0121MFR# 14087
Part
Thermocouples for Miditherm 100 & 200 — 2/pack
Ceramic base plate for Miditherm 100$238.39
Ceramic base plate for Miditherm 200$373.50
Thermocouples for Miditherm 100 & 200 — 2/pack$448.50
Bego Thermo-couple FOR ALL Miditherm 100 & 200, PK OF 2 is a genuine replacement part for Bego dental laboratory equipment. Catalog code 14087.
Bego Miditherm Preheating Furnace Parts is a furnace part from Bego.
This page carries 3 part options: Ceramic base plate for Miditherm 100, Ceramic base plate for Miditherm 200, Thermocouples for Miditherm 100 & 200 — 2/pack.
Find it on our Lab Equipment shelf, under Digital, Furnace & Curing Equipment.
Orders placed before 3 PM ET ship the same day when the item is on our shelf (otherwise within 3 business days), and ground shipping is free over $10.
Product
- Manufacturer
- Bego
- Manufacturer #
- 14087
- Item code
- 011-0121
Catalog path
- Marketplace
- Laboratory
- Category
- Lab Equipment
- Subcategory
- Digital, Furnace & Curing Equipment
Ordering
- Status
- Ships in 3 business days
More from Digital, Furnace & Curing Equipment
Stocked in the same subcategory.
Questions
What is Bego Miditherm Preheating Furnace Parts used for?
Bego Thermo-couple FOR ALL Miditherm 100 & 200, PK OF 2 is a genuine replacement part for Bego dental laboratory equipment.
Which part options are on this page?
This page carries 3 part options: Ceramic base plate for Miditherm 100, Ceramic base plate for Miditherm 200, Thermocouples for Miditherm 100 & 200 — 2/pack. Pick one to see its price, part number and stock.
When does it ship?
In-stock orders placed before 3 PM ET ship the same day; anything not on our shelf ships within 3 business days.Ground shipping is free over $10.
About furnace parts
The muffle is the portion of a furnace, usually removable or replaceable, in which material is placed for processing.
Denture processing is the means by which denture base material is polymerised into the form of a denture. Firing is the process of porcelain fusion, used in dentistry to produce porcelain restorations.
The FDA describes dental porcelain as a powder heated to a high temperature in an oven to produce a hard prosthesis with a glass-like finish.
How presses, curing units, furnaces and formers differ
- Flask & Hydraulic Presses — Holds the mould and presses the resin into it.
- Denture Curing Units — Polymerises the resin once it is in the mould.
- Furnace Units — Heats ceramics to firing temperature; wax elimination, the removal of wax from a mould, is also usually done by heat.
- Furnace Parts — The replaceable parts of a furnace, such as the muffle.
- Curing Lights & Parts — Polymerises resin with light of a set wavelength range.
- Vacuum Formers & Injectors — Shapes a softened sheet over a cast, or injects material into a closed mould, in place of packing a flask.
- General Repair & Replacement Parts — Burner parts, a curing unit spigot, a halogen bulb and press parts.
What to look at when choosing
Processing method: an injection method was developed to deal with the shrinkage of heat-cured acrylic in compression moulding.
Temperature: ISO 13078 exists because a furnace has to be calibrated; its method covers 600 to 1,050 degrees Celsius.
Cleaning between cases: the CDC notes that pressure pots and water baths are particularly susceptible to contamination and should be cleaned and disinfected between patients.
Sources: The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · FDA 21 CFR 872.6660, Porcelain powder for clinical use · Comparison of Conventional Pressure-packed and Injection Molding Processing Methods for an Acrylic Resin Denture (Int J Dent 2022) · ISO 13078:2013, Dental furnace: test method for temperature measurement with separate thermocouple · ISO 10650:2026, Powered polymerization activators · CDC, Guidelines for Infection Control in Dental Health-Care Settings, 2003 (MMWR 52 RR-17)
