TCSShips in 3 business days
TCS iFlex Flexible Partial Resin, Bulk · 0.5 kg · 3 Light-Dark Pink
SKU 008-1182MFR# 5003-01B/3-.5
Size
0.5 kg
0.5 kg$127.10
1 kg$250.00
Shade
3 Light-Dark Pink
1 Light Pink$127.10
2 Standard Pink$127.10
3 Light-Dark Pink$127.10
4 Dark Pink$127.10
Custom$127.10
N Natural$127.10
Thermoplastic Denture Base Resin - Standard Pink, 1Kg Bulk Refill. Injection type polyolefin thermoplastic with translucent finish. Offers ideal degree of flexibility for a durable, lightweight, and modern flexible partial. Repairable and rebasable. Indicated for patients who have concerns over metal restorations, are allergic to monomer and/or nickel. Also suitable for restorations during the healing period for implants. Comes with 50 delivery bags, 50 patient care instructions.
Product
- Manufacturer
- TCS
- Manufacturer #
- 5003-01B/3-.5
- Item code
- 008-1182
Catalog path
- Marketplace
- Laboratory
- Category
- Dentures & Acrylics
- Subcategory
- Denture Resins
Ordering
- Status
- Ships in 3 business days
More from Denture Resins
Stocked in the same subcategory.
Questions
What is TCS iFlex Flexible Partial Resin, Bulk used for?
Thermoplastic Denture Base Resin - Standard Pink, 1Kg Bulk Refill.
Which size and shade options are on this page?
This page carries 2 size options: 0.5 kg, 1 kg. This page carries 6 shade options: 1 Light Pink, 2 Standard Pink, 3 Light-Dark Pink, 4 Dark Pink, Custom, N Natural. Pick one to see its price, part number and stock.
When does it ship?
In-stock orders placed before 3 PM ET ship the same day; anything not on our shelf ships within 3 business days.Ground shipping is free over $10.
About flexible denture resin
Flexible denture resin is thermoplastic nylon, a polyamide, used mainly for flexible, tissue-supported removable partial dentures. Thermoplastic resins often contain extremely little or nearly no free monomer. A review notes that polyamides are challenging to process and repair and have high water sorption and a potential for staining.
The denture base is the part of a removable denture that carries the artificial teeth and covers the soft tissue of the mouth. Polymethyl methacrylate, PMMA, has been the most widely used denture base material since 1937. It comes as a powder of pre-polymerized PMMA beads with a little initiator, and a liquid of methyl methacrylate monomer.
The FDA regulates denture relining, repairing or rebasing resin, the resin that forms a new denture base, as a Class II device (21 CFR 872.3760). ISO 20795-1 classifies denture base polymers and sets their requirements.
How the types of denture resin differ
- Heat-Cure Denture Resin — Cured with heat; a review reports greater surface hardness and lower sorption and solubility than cold-cured resin.
- Pourable Denture Resin — A very fluid mix that is poured into the mold.
- Self-Cure Denture Resin — Set off by a chemical activator instead of heat.
- Orthodontic & Retainer Resins — Acrylic for orthodontic appliances, active or passive, not for denture bases.
- Repair Acrylics — The acrylic used to mend a cracked or broken denture.
- Flexible Denture Resin — A thermoplastic that flexes, injected into the mold instead of being mixed from powder and liquid.
- Resin Accessories — Empty cartridges, monomer liquids and processing supplies rather than a complete resin.
- Hard Reline Materials — Powder and liquid reline acrylics, also filed on the reline and repair shelf.
What to look at when choosing a denture resin
Residual monomer: most of it is released in the first twenty-four hours after processing, followed by a moderate and steady release.
Impact strength: high-impact resins are reinforced with butadiene-styrene rubber and are handled like other heat-activated resins, as powder and liquid.
Processing: with heat-cured PMMA, a review reports less polymerization shrinkage for injection molding than for conventional compression molding.
Flexible resins: nylon, a polyamide, is used mainly for flexible tissue-supported partial dentures. The same review notes that polyamides are challenging to process and repair.
Standard: under ISO 20795-1 water sorption should be less than 32 micrograms per cubic millimetre and solubility less than 1.6.
Sources: Binaljadm 2024, Flexible Denture: A Literature Review (Cureus) · Alqutaibi et al. 2023, Polymeric Denture Base Materials: A Review (Polymers) · FDA 21 CFR 872.3760, Denture relining, repairing, or rebasing resin · ISO 20795-1:2013, Base polymers, Part 1: Denture base polymers · The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · ISO 20795-2:2013, Base polymers, Part 2: Orthodontic base polymers · Ranjan et al. 2021, Joint Surface Preparations and Chemical Surface Treatment on the Transverse Strength of Repaired Denture Base Resin (J Pharm Bioallied Sci) · Kumar et al. 2017, Effect of Reinforced Autopolymerizing Resin on the Flexural Strength of Repaired Heat-polymerized Denture Base Resin (PMC5682712)
