
S&S Scheftner Wax Clasp Profiles for Partial Technique · A1 Premolar Clasps
Scheftner preformed wax clasp profiles for partial denture frameworks are anatomically shaped, adapt to the model without tension, hold their form and burn out without residue. Turquoise.
What Scheftner says about it
- Burns without residue
- Form stable
- Tension-free adaptation to the model
- Anatomically shaped
On this page
| A1 Premolar Clasps | Scheftner Ref. 561400 |
|---|---|
| A2 Molar Clasps | Scheftner Ref. 561410 |
| A3 Ring Clasps | Scheftner Ref. 561420 |
| A5 Bonyhard Clasps | Scheftner Ref. 561440 |
Questions about this product
- What is the wax clasp profiles used for?
- Scheftner preformed wax clasp profiles for partial denture frameworks are anatomically shaped, adapt to the model without tension, hold their form and burn out without residue. Turquoise.
- Which options are on this page?
- A1 Premolar Clasps (Ref. 561400); A2 Molar Clasps (Ref. 561410); A3 Ring Clasps (Ref. 561420); A5 Bonyhard Clasps (Ref. 561440).
- Who makes the wax clasp profiles?
- S&S Scheftner, a dental alloy and laboratory materials maker in Mainz, Germany.
Product
- Manufacturer
- S&S Scheftner
- Manufacturer #
- 561400
- Item code
- 119-0214
Catalog path
- Marketplace
- Laboratory
- Category
- Wax
- Subcategory
- Pattern & Casting Wax
Ordering
- Status
- Special order
More from Pattern & Casting Wax
Stocked in the same subcategory.
About pattern accessories
Pattern accessories on the pattern and casting wax shelf are sticky wax, adhesive wax, wax retentions, wire wax and measuring discs for casting wax.
Casting wax is a composition of various waxes with the properties needed for making wax patterns that will be formed into metal castings. A wax pattern is a wax form that is the positive likeness of the object to be made. In the lost-wax technique the pattern is surrounded with a refractory slurry that sets, and is then removed by heat, leaving the mold into which metal or ceramic is cast.
The FDA lists intraoral dental wax, used to construct the patterns from which metal prostheses are cast, as a Class I device (21 CFR 872.6890). ISO 15854 is the standard for waxes used for dental casting by the lost-wax technique, including products intended for CAD/CAM milling.
How the waxes on this shelf differ
- Pattern Wire Wax — Ready-made wax shapes that are placed on the cast in place of free-hand waxing.
- Sprue Wire Wax — Wax wire that forms the channel for the molten metal.
- Modeling Wax — The wax that is added and shaped to build the pattern.
- Cervical Wax — Used at the neck of the pattern, at or near the cemento-enamel junction.
- Pattern Accessories — Sticky and adhesive wax, wax retentions, wire wax and measuring discs.
What to look at when choosing a pattern wax
Flow: under ANSI/ADA specification No. 4 a Type 1 wax may flow at most 1 percent at 37 °C, and Type 1 and Type 2 waxes must flow between 70 and 90 percent at 45 °C.
Thermal expansion: a rise of 20 °C expands inlay wax by 0.7 percent in length.
Distortion: a wax pattern can hold internal strains from the way it was worked, and it distorts when the strain relaxes. Time and temperature both make it worse, which is why patterns are generally invested immediately after they leave the die or cast.
Resin patterns: in one study resin pattern materials changed significantly less in dimension than inlay casting wax when stored for 1, 12 and 24 hours.
Sources: The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · FDA 21 CFR 872.6890, Intraoral dental wax · ISO 15854:2023, Casting and baseplate waxes · Distortion in Wax Patterns Fabricated Using Conventional and Electrical Heat Sources, 2023 (Cureus, PMC10388666) · Gopalan et al. 2018, Marginal adaptation of a thermoplastic resin, a light cured wax and an inlay casting wax (PMC5799966)







