
S&S Scheftner Starbond Easy Cobalt-Chrome Laser Melting Powder · Easy Powder 30
Starbond Easy Powder is a bondable cobalt-chrome-tungsten powder for laser melting (LPBF, DMLS, SLM), based on the Starbond Easy casting alloy. It comes in three grain sizes. Each pack is 5 kg.
What Scheftner says about it
- Same alloy as cast Starbond Easy, so the familiar workflow stays
- Wide choice of veneering ceramics
- For crowns, bridges, flexible clasp dentures and orthodontic appliances
- Made for LPBF, DMLS and SLM printers
Composition
| Cobalt (Co) | 61 % |
|---|---|
| Chromium (Cr) | 27.5 % |
| Tungsten (W) | 8.5 % |
| Silicon (Si) | 1.6 % |
| C,Fe,Mn | 1 % |
Technical data
| Proof stress (Rp 0.2) | 760 MPa |
|---|---|
| Ultimate tensile strength | 1090 MPa |
| Elongation | 15% |
| Elastic modulus | 225 GPa |
| Vickers hardness | 425 HV 10 |
| Density | 8.5 g/cm³ |
| Melting range | 1310-1410 °C |
| CTE (20-500 °C) | 14.5 x 10⁻⁶K⁻¹ |
| CTE (20-600 °C) | 14.7 x 10⁻⁶K⁻¹ |
| Laser weldable | Ja |
| Type (DIN EN ISO 22674) | 5 |
Grain sizes and printers named by Scheftner
| Easy Powder 30 (Ref. 140730) | +10/-30 µm: LASERTEC 12 SLM, Arrow Metal Printer, EOS M 100, MLab cusing, M1 cusing, Mysint 100 / 100 RM / 100 Dual, TruPrint 1000 |
|---|---|
| Easy Powder 30+ (Ref. 140731) | +15/-38 µm: LaserCUSING and MYSINT systems |
| Easy Powder 55 (Ref. 140755) | +10/-55 µm |
On this page
| Easy Powder 30 | Scheftner Ref. 140730 |
|---|---|
| Easy Powder 30+ | Scheftner Ref. 140731 |
| Easy Powder 55 | Scheftner Ref. 140755 |
Questions about this product
- What is Starbond Easy Powder used for?
- Starbond Easy Powder is a bondable cobalt-chrome-tungsten powder for laser melting (LPBF, DMLS, SLM), based on the Starbond Easy casting alloy. It comes in three grain sizes. Each pack is 5 kg.
- What is Starbond Easy Powder made of?
- Cobalt 61 %, Chromium 27.5 %, Tungsten 8.5 %, Silicon 1.6 %, C,Fe,Mn 1 %.
- How hard is Starbond Easy Powder?
- Vickers hardness is 425 HV 10, with a proof stress of 760 MPa and a tensile strength of 1090 MPa.
- What is the thermal expansion of Starbond Easy Powder?
- 14.5 x 10⁻⁶K⁻¹ (20-500 °C); 14.7 x 10⁻⁶K⁻¹ (20-600 °C).
- Which options are on this page?
- Easy Powder 30 (Ref. 140730); Easy Powder 30+ (Ref. 140731); Easy Powder 55 (Ref. 140755).
- Who makes Starbond Easy Powder?
- S&S Scheftner, a dental alloy and laboratory materials maker in Mainz, Germany.
Product
- Manufacturer
- S&S Scheftner
- Manufacturer #
- 140730
- Item code
- 119-0025
Catalog path
- Marketplace
- Laboratory
- Category
- Investment & Casting
- Subcategory
- Alloys & Metals
Ordering
- Status
- Special order
More from Alloys & Metals
Stocked in the same subcategory.
About cobalt-chrome alloys
Cobalt chromium alloy is a low-density base metal dental casting alloy of 60 to 75 percent cobalt and up to 30 percent chromium. The chromium, by its passivation effect, ensures the corrosion resistance of the alloy. The alloys on this shelf are sold for partial denture frameworks and for metal-to-ceramic work.
A base metal alloy is an alloy composed of metals that are not noble. The FDA describes a base metal alloy as composed primarily of base metals such as nickel, chromium or cobalt, for cast or porcelain-fused-to-metal crown and bridge restorations (21 CFR 872.3710).
ISO 22674 sets the requirements and test methods for the metallic materials used to make dental restorations and appliances, with or without a ceramic veneer.
How cobalt-chrome alloys, nickel-chrome alloys and soldering supplies differ
- Cobalt-Chrome Alloys — Cobalt with up to 30 percent chromium; the framework alloy.
- Nickel-Chrome Alloys — Nickel-based; listed here as a ceramic alloy.
- Soldering & Torches — What joins cast parts: solder, flux, welding wire and torch tips.
What to look at when choosing an alloy
Use: ISO 22674 covers metallic materials recommended for use with a ceramic veneer, without one, or for both.
Handling: base metal alloys are technique sensitive in the laboratory, especially during casting and soldering.
Soldered joints: one study found no significant difference in joint strength or porosity between gas-oxygen torch and infrared soldering, or between gaps of 0.3 mm and 0.5 mm.
Sources: The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · FDA 21 CFR 872.3710, Base metal alloy · ISO 22674:2022, Dentistry — Metallic materials for fixed and removable restorations and appliances · Oxidation heat treatment and the porcelain to base metal alloy bond strength, 2022 (PMC9170503) · Infrared ray and gas torch soldering of Ni-Cr base metal alloy, 2010 (PMC3024500)







