
S&S Scheftner Starbond Easy Cobalt-Chrome Bonding Alloy · 1 kg
Starbond Easy is a cobalt-chrome-tungsten casting alloy for porcelain-fused-to-metal work with conventional high-fusing ceramics. It is free of nickel and beryllium and has a thermal expansion of 14.4 for a wide choice of ceramics.
What Scheftner says about it
- Free of nickel, lead, beryllium and cadmium.
- Type 4 pursuant to DIN EN ISO 22674.
- High degree of purity
- Biocompatible and extremely corrosion resistant
- System-free working due to very good alloy properties
- Pleasant polishing properties and finishing due to low hardness of 285 HV10
- A CTE of 14.4 enables flexibility in ceramic selection and safe veneering
- Excellent metal-ceramic bonding, even without bonder
- An oxidation firing can be omitted
- Optimal conditions for laser welding
- Application flexibility and easy melting, no sparking
Composition
| Cobalt (Co) | 61 % |
|---|---|
| Chromium (Cr) | 27.5 % |
| Molybdenum (Mo) | 8.5 % |
| Silicon (Si) | 1.6 % |
| C,Mn,Fe | 1 % |
Technical data
| Proof stress (Rp 0.2) | 610 MPa |
|---|---|
| Ultimate tensile strength | 830 MPa |
| Elongation | 10% |
| Elastic modulus | 190 GPa |
| Vickers hardness | 285 HV 10 |
| Density | 8.7 g/cm³ |
| Melting range | 1310 - 1410 °C |
| Preheating temperature | 850 - 950 °C |
| Casting temperature | 1480 - 1530 °C |
| CTE (20-600 °C) | 14.4 x 10⁻⁶K⁻¹ |
| Laser weldable | Yes |
| Type (DIN EN ISO 22674) | 4 |
On this page
| 1 kg | Scheftner Ref. 140000 |
|---|---|
| 250 g | Scheftner Ref. 140250 |
Questions about this product
- What is Starbond Easy used for?
- Starbond Easy is a cobalt-chrome-tungsten casting alloy for porcelain-fused-to-metal work with conventional high-fusing ceramics. It is free of nickel and beryllium and has a thermal expansion of 14.4 for a wide choice of ceramics.
- What is Starbond Easy made of?
- Cobalt 61 %, Chromium 27.5 %, Molybdenum 8.5 %, Silicon 1.6 %, C,Mn,Fe 1 %.
- What is Starbond Easy free of?
- Scheftner states: free of nickel, lead, beryllium and cadmium.
- How hard is Starbond Easy?
- Vickers hardness is 285 HV 10, with a proof stress of 610 MPa and a tensile strength of 830 MPa.
- At what temperature is Starbond Easy cast?
- Scheftner gives a casting temperature of 1480 - 1530 °C and a preheating temperature of 850 - 950 °C.
- Can Starbond Easy be laser welded?
- Yes. Scheftner lists it as laser weldable.
- What is the thermal expansion of Starbond Easy?
- 14.4 x 10⁻⁶K⁻¹ (20-600 °C).
- Which options are on this page?
- 1 kg (Ref. 140000); 250 g (Ref. 140250).
- Who makes Starbond Easy?
- S&S Scheftner, a dental alloy and laboratory materials maker in Mainz, Germany.
Product
- Manufacturer
- S&S Scheftner
- Manufacturer #
- 140000
- Item code
- 119-0017
- UPC / Barcode
- 4260207854080
Catalog path
- Marketplace
- Laboratory
- Category
- Investment & Casting
- Subcategory
- Alloys & Metals
Ordering
- Status
- Special order
More from Alloys & Metals
Stocked in the same subcategory.
About cobalt-chrome alloys
Cobalt chromium alloy is a low-density base metal dental casting alloy of 60 to 75 percent cobalt and up to 30 percent chromium. The chromium, by its passivation effect, ensures the corrosion resistance of the alloy. The alloys on this shelf are sold for partial denture frameworks and for metal-to-ceramic work.
A base metal alloy is an alloy composed of metals that are not noble. The FDA describes a base metal alloy as composed primarily of base metals such as nickel, chromium or cobalt, for cast or porcelain-fused-to-metal crown and bridge restorations (21 CFR 872.3710).
ISO 22674 sets the requirements and test methods for the metallic materials used to make dental restorations and appliances, with or without a ceramic veneer.
How cobalt-chrome alloys, nickel-chrome alloys and soldering supplies differ
- Cobalt-Chrome Alloys — Cobalt with up to 30 percent chromium; the framework alloy.
- Nickel-Chrome Alloys — Nickel-based; listed here as a ceramic alloy.
- Soldering & Torches — What joins cast parts: solder, flux, welding wire and torch tips.
What to look at when choosing an alloy
Use: ISO 22674 covers metallic materials recommended for use with a ceramic veneer, without one, or for both.
Handling: base metal alloys are technique sensitive in the laboratory, especially during casting and soldering.
Soldered joints: one study found no significant difference in joint strength or porosity between gas-oxygen torch and infrared soldering, or between gaps of 0.3 mm and 0.5 mm.
Sources: The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · FDA 21 CFR 872.3710, Base metal alloy · ISO 22674:2022, Dentistry — Metallic materials for fixed and removable restorations and appliances · Oxidation heat treatment and the porcelain to base metal alloy bond strength, 2022 (PMC9170503) · Infrared ray and gas torch soldering of Ni-Cr base metal alloy, 2010 (PMC3024500)







