
Star-Mod C is a precise cervical wax for shaping crown margins, with very low shrinkage and no tension. It has no opaque components, so the margin is easier to see and it suits all-ceramic systems. Working temperature is 59 °C. Tins are 70 g.
What Scheftner says about it
- Lowest shrinkage
- Form stable
- Non-lubricating, non-friable
- Tension-free
- Since it does not have any opaque components, the cervical margin is better seen and the suitability for all-ceramic systems is additionally guaranteed.
- Working temperature: 59 °C.
On this page
| Red | Scheftner Ref. 521400 |
|---|---|
| Blue | Scheftner Ref. 521410 |
Questions about this product
- What is Star-Mod C used for?
- Star-Mod C is a precise cervical wax for shaping crown margins, with very low shrinkage and no tension. It has no opaque components, so the margin is easier to see and it suits all-ceramic systems. Working temperature is 59 °C. Tins are 70 g.
- What is the working temperature of Star-Mod C?
- 59 °C.
- Which options are on this page?
- Red (Ref. 521400); Blue (Ref. 521410).
- Who makes Star-Mod C?
- S&S Scheftner, a dental alloy and laboratory materials maker in Mainz, Germany.
Product
- Manufacturer
- S&S Scheftner
- Manufacturer #
- 521410
- Item code
- 119-0171
Catalog path
- Marketplace
- Laboratory
- Category
- Wax
- Subcategory
- Modeling & Carving Wax
Ordering
- Status
- Special order
More from Modeling & Carving Wax
Stocked in the same subcategory.
About cervical wax
Cervical wax is the wax sold for the cervical part of a pattern: the region at or near the cemento-enamel junction, the neck of the tooth.
Modeling wax is a wax suitable for making patterns in the fabrication of restorations. Waxing is the contouring of a wax pattern, or of the wax base of a trial denture, into the desired form. The wax pattern sets the shape, size and contour of the restoration.
The FDA lists intraoral dental wax, used to construct the patterns from which metal prostheses are cast, as a Class I device (21 CFR 872.6890).
How modeling, carving, cervical and dipping wax and wax discs differ
- Modeling Wax — The wax that is added and shaped to build the pattern.
- Carving Wax — Sold as blocks and rods to be cut to shape.
- Cervical Wax — Used at the neck of the pattern, at or near the cemento-enamel junction.
- Dipping Wax — Kept molten in a bath; the die is dipped to make a coping pattern in one step.
- Wax Discs — A blank for the milling machine, not for hand waxing.
- Pattern Wire Wax — Ready-made wax shapes that are placed on the cast in place of free-hand waxing.
What to look at when choosing
Flow: under ANSI/ADA specification No. 4 a Type 1 wax may flow at most 1 percent at 37 °C, and Type 1 and Type 2 waxes must flow between 70 and 90 percent at 45 °C.
Shrinkage on cooling: cooling from 37 °C to 25 °C can contract inlay wax by up to 0.35 percent.
Distortion: a wax pattern can hold internal strains from the way it was worked, and it distorts when the strain relaxes. Time and temperature both make it worse, which is why patterns are generally invested immediately after they leave the die or cast.
Sources: The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · Distortion in Wax Patterns Fabricated Using Conventional and Electrical Heat Sources, 2023 (Cureus, PMC10388666) · FDA 21 CFR 872.6890, Intraoral dental wax · Ram et al. 2019, Microcomputed tomography to evaluate the fit of a restoration as compared to conventional replica technique (PMC6685334) · ISO 15854:2023, Casting and baseplate waxes







