Skip to content
Free shipping over $10Order by 3 PM ET, ships the same day 30-day returns, no restocking fee
(814) 299-9937 · Mon–Fri 9am–5pm ET
S&S Scheftner Plastopress LT Self-Cure Denture Acrylic
S&S ScheftnerSpecial order

S&S Scheftner Plastopress LT Self-Cure Denture Acrylic · Liquid, 250 ml

SKU 119-0239MFR# 801015

Plastopress LT is a universal cold-curing, pourable denture base acrylic for every indication: full dentures, finishing cast partials, indirect relines, immediate dentures, additions and repairs. It is cadmium-free with low residual monomer. Powder and liquid are sold separately.

What Scheftner says about it

  • Pourable resin based on methyl methacrylate, for all indications. PlastoPress LT is the universal cold-curing resin for dental technicians who want to cover all applications with a single acrylic resin.
  • Manufacture of total upper and lower dentures
  • Completion of model cast dentures
  • Indirect relining
  • Immediate dentures
  • Additions and repairs
  • Average processing time
  • Very good flowability
  • Universal application
  • Good mucosal tolerance due to low residual monomer Content
  • Absolute colour stability through a catalyst system free of tertiary Amine
  • Cadmium free
  • Tested and certified biocompatibility

On this page

Powder, Clear, 500 g Scheftner Ref. 801000
Powder, Pink, 500 g Scheftner Ref. 801010
Liquid, 250 ml Scheftner Ref. 801015
Powder, Pink, 1000 g Scheftner Ref. 801020
Liquid, 500 ml Scheftner Ref. 801025
Powder, Pink Opaque, 1000 g Scheftner Ref. 801030
Questions about this product
What is Plastopress LT used for?
Plastopress LT is a universal cold-curing, pourable denture base acrylic for every indication: full dentures, finishing cast partials, indirect relines, immediate dentures, additions and repairs. It is cadmium-free with low residual monomer. Powder and liquid are sold separately.
Which options are on this page?
Powder, Clear, 500 g (Ref. 801000); Powder, Pink, 500 g (Ref. 801010); Liquid, 250 ml (Ref. 801015); Powder, Pink, 1000 g (Ref. 801020); Liquid, 500 ml (Ref. 801025); Powder, Pink Opaque, 1000 g (Ref. 801030).
Who makes Plastopress LT?
S&S Scheftner, a dental alloy and laboratory materials maker in Mainz, Germany.

Product

Manufacturer
S&S Scheftner
Manufacturer #
801015
Item code
119-0239

Catalog path

Marketplace
Laboratory
Subcategory
Denture Resins

Ordering

Status
Special order

More from Denture Resins

Stocked in the same subcategory.

View all 76
RMH3 Dental Light Curing Base Plates, Custom Tray — 50/Pack
RMH3 Dental
Light Curing Base Plates, Custom Tray — 50/Pack
2 colors
In stock
56 sold this month
from $45.12
Parkell MucoHard+ Hard Denture Reline
Parkell
MucoHard+ Hard Denture Reline
3 items
In stock
40 sold this month
from $41.25
Keystone Pip Denture Cleaner & Brushes
Keystone Industries
Keystone Pip Denture Cleaner & Brushes
15 items
In stock
41 sold this month
from $3.85

About self-cure denture resin

A self-cure resin, also called cold-curing or autopolymerizing, is one whose polymerization is sped up by a chemical instead of heat. Its polymerization is never as complete as that of heat-activated resin, which leaves more free monomer: 3 to 5 percent against 0.2 to 0.5 percent.

The denture base is the part of a removable denture that carries the artificial teeth and covers the soft tissue of the mouth. Polymethyl methacrylate, PMMA, has been the most widely used denture base material since 1937. It comes as a powder of pre-polymerized PMMA beads with a little initiator, and a liquid of methyl methacrylate monomer.

The FDA regulates denture relining, repairing or rebasing resin, the resin that forms a new denture base, as a Class II device (21 CFR 872.3760). ISO 20795-1 classifies denture base polymers and sets their requirements.

How the types of denture resin differ
  • Heat-Cure Denture Resin — Cured with heat; a review reports greater surface hardness and lower sorption and solubility than cold-cured resin.
  • Pourable Denture Resin — A very fluid mix that is poured into the mold.
  • Self-Cure Denture Resin — Set off by a chemical activator instead of heat.
  • Orthodontic & Retainer Resins — Acrylic for orthodontic appliances, active or passive, not for denture bases.
  • Repair Acrylics — The acrylic used to mend a cracked or broken denture.
  • Flexible Denture Resin — A thermoplastic that flexes, injected into the mold instead of being mixed from powder and liquid.
  • Resin Accessories — Empty cartridges, monomer liquids and processing supplies rather than a complete resin.
  • Hard Reline Materials — Powder and liquid reline acrylics, also filed on the reline and repair shelf.
What to look at when choosing a denture resin

Residual monomer: most of it is released in the first twenty-four hours after processing, followed by a moderate and steady release.

Impact strength: high-impact resins are reinforced with butadiene-styrene rubber and are handled like other heat-activated resins, as powder and liquid.

Processing: with heat-cured PMMA, a review reports less polymerization shrinkage for injection molding than for conventional compression molding.

Flexible resins: nylon, a polyamide, is used mainly for flexible tissue-supported partial dentures. The same review notes that polyamides are challenging to process and repair.

Standard: under ISO 20795-1 water sorption should be less than 32 micrograms per cubic millimetre and solubility less than 1.6.

Sources: Binaljadm 2024, Flexible Denture: A Literature Review (Cureus) · Alqutaibi et al. 2023, Polymeric Denture Base Materials: A Review (Polymers) · FDA 21 CFR 872.3760, Denture relining, repairing, or rebasing resin · ISO 20795-1:2013, Base polymers, Part 1: Denture base polymers · The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · ISO 20795-2:2013, Base polymers, Part 2: Orthodontic base polymers · Ranjan et al. 2021, Joint Surface Preparations and Chemical Surface Treatment on the Transverse Strength of Repaired Denture Base Resin (J Pharm Bioallied Sci) · Kumar et al. 2017, Effect of Reinforced Autopolymerizing Resin on the Flexural Strength of Repaired Heat-polymerized Denture Base Resin (PMC5682712)