
S&S Scheftner PlastoDon N Heat-Cure Denture Acrylic · Powder, Pink, 500 g
PlastoDon N is an economical heat-curing denture base acrylic for full upper and lower dentures made by the press (packing) method. It is cadmium-free, with low residual monomer and stable colours. Powder and liquid are sold separately.
What Scheftner says about it
- Universal denture base resin based on methyl methacrylate, for the controlled hot polymerization. PlastoDon N is an economical, cadmium-free prothesis resin, in premium quality, which is suitable for all common hot-polymerisation works. The continuously developed formula ensures reliable results at all times.
- Production of total upper and lower jaw prostheses using the press / stuffing method
- Simplest processing
- Precision fit and guaranteed high-quality results
- Excellent mechanical properties
- Good price-performance Ratio
- Optimal mucosal tolerance due to low residual monomer Content
- Physiological colours and absolute colour stability
- Cadmium free
- Tested and certified biocompatibility
On this page
| Powder, Pink, 500 g | Scheftner Ref. 801210 |
|---|---|
| Liquid, 250 ml | Scheftner Ref. 801215 |
| Powder, Pink, 1000 g | Scheftner Ref. 801220 |
| Liquid, 500 ml | Scheftner Ref. 801225 |
| Powder, Clear, 1000 g | Scheftner Ref. 801230 |
| Powder, Pink Fibered, 1000 g | Scheftner Ref. 801240 |
Questions about this product
- What is PlastoDon N used for?
- PlastoDon N is an economical heat-curing denture base acrylic for full upper and lower dentures made by the press (packing) method. It is cadmium-free, with low residual monomer and stable colours. Powder and liquid are sold separately.
- Which options are on this page?
- Powder, Pink, 500 g (Ref. 801210); Liquid, 250 ml (Ref. 801215); Powder, Pink, 1000 g (Ref. 801220); Liquid, 500 ml (Ref. 801225); Powder, Clear, 1000 g (Ref. 801230); Powder, Pink Fibered, 1000 g (Ref. 801240).
- Who makes PlastoDon N?
- S&S Scheftner, a dental alloy and laboratory materials maker in Mainz, Germany.
Product
- Manufacturer
- S&S Scheftner
- Manufacturer #
- 801210
- Item code
- 119-0247
Catalog path
- Marketplace
- Laboratory
- Category
- Dentures & Acrylics
- Subcategory
- Denture Resins
Ordering
- Status
- Special order
More from Denture Resins
Stocked in the same subcategory.




About heat-cure denture resin
Almost all denture bases are made with heat-activated resin; a water bath or a microwave oven supplies the heat that polymerizes it. Heat-activated resin is left with 0.2 to 0.5 percent free monomer, against 3 to 5 percent for chemically activated resin.
The denture base is the part of a removable denture that carries the artificial teeth and covers the soft tissue of the mouth. Polymethyl methacrylate, PMMA, has been the most widely used denture base material since 1937. It comes as a powder of pre-polymerized PMMA beads with a little initiator, and a liquid of methyl methacrylate monomer.
The FDA regulates denture relining, repairing or rebasing resin, the resin that forms a new denture base, as a Class II device (21 CFR 872.3760). ISO 20795-1 classifies denture base polymers and sets their requirements.
How the types of denture resin differ
- Heat-Cure Denture Resin — Cured with heat; a review reports greater surface hardness and lower sorption and solubility than cold-cured resin.
- Pourable Denture Resin — A very fluid mix that is poured into the mold.
- Self-Cure Denture Resin — Set off by a chemical activator instead of heat.
- Orthodontic & Retainer Resins — Acrylic for orthodontic appliances, active or passive, not for denture bases.
- Repair Acrylics — The acrylic used to mend a cracked or broken denture.
- Flexible Denture Resin — A thermoplastic that flexes, injected into the mold instead of being mixed from powder and liquid.
- Resin Accessories — Empty cartridges, monomer liquids and processing supplies rather than a complete resin.
- Hard Reline Materials — Powder and liquid reline acrylics, also filed on the reline and repair shelf.
What to look at when choosing a denture resin
Residual monomer: most of it is released in the first twenty-four hours after processing, followed by a moderate and steady release.
Impact strength: high-impact resins are reinforced with butadiene-styrene rubber and are handled like other heat-activated resins, as powder and liquid.
Processing: with heat-cured PMMA, a review reports less polymerization shrinkage for injection molding than for conventional compression molding.
Flexible resins: nylon, a polyamide, is used mainly for flexible tissue-supported partial dentures. The same review notes that polyamides are challenging to process and repair.
Standard: under ISO 20795-1 water sorption should be less than 32 micrograms per cubic millimetre and solubility less than 1.6.
Sources: Binaljadm 2024, Flexible Denture: A Literature Review (Cureus) · Alqutaibi et al. 2023, Polymeric Denture Base Materials: A Review (Polymers) · FDA 21 CFR 872.3760, Denture relining, repairing, or rebasing resin · ISO 20795-1:2013, Base polymers, Part 1: Denture base polymers · The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · ISO 20795-2:2013, Base polymers, Part 2: Orthodontic base polymers · Ranjan et al. 2021, Joint Surface Preparations and Chemical Surface Treatment on the Transverse Strength of Repaired Denture Base Resin (J Pharm Bioallied Sci) · Kumar et al. 2017, Effect of Reinforced Autopolymerizing Resin on the Flexural Strength of Repaired Heat-polymerized Denture Base Resin (PMC5682712)



