
S&S Scheftner Mogucera N Nickel-Chrome Bonding Alloy · 1 kg
Mogucera N is a nickel-chrome casting alloy for porcelain-fused-to-metal work with conventional high-fusing ceramics. It is beryllium-free, melts and casts easily, and is a Type 4 alloy.
What Scheftner says about it
- Free of cadmium, beryllium and lead.
- Type 4 pursuant to DIN EN ISO 22674.
- High degree of purity
- Biocompatible and extremely corrosion resistant
- Wide range of indications
- Best melting and casting properties
- System-free working due to very good alloy properties
- Pleasant polishing properties and easy finishing due to low hardness of 245 HV10
- Flexibility in ceramic selection and safe veneering
- Excellent metal-ceramic bonding, even without bonder
- An oxidation firing can be omitted
- Optimal conditions for laser welding
- Application flexibility and easy melting, no sparking
Composition
| Nickel (Ni) | 62 % |
|---|---|
| Chromium (Cr) | 24 % |
| Molybdenum (Mo) | 11 % |
| Silicon (Si) | 1.6 % |
| Manganese (Mn) | 1 % |
Technical data
| Proof stress (Rp 0.2) | 379 MPa |
|---|---|
| Ultimate tensile strength | 664 MPa |
| Elongation | 8% |
| Elastic modulus | 200 GPa |
| Vickers hardness | 245 HV 10 |
| Density | 8.3 g/cm³ |
| Melting range | 1290 - 1350 °C |
| Preheating temperature | 850 - 950 °C |
| Casting temperature | 1450 - 1500 °C |
| CTE (20-600 °C) | 14.4 x 10⁻⁶K⁻¹ |
| Laser weldable | Yes |
| Type (DIN EN ISO 22674) | 4 |
On this page
| 1 kg | Scheftner Ref. 139000 |
|---|---|
| 25 g | Scheftner Ref. 139050 |
Questions about this product
- What is Mogucera N used for?
- Mogucera N is a nickel-chrome casting alloy for porcelain-fused-to-metal work with conventional high-fusing ceramics. It is beryllium-free, melts and casts easily, and is a Type 4 alloy.
- What is Mogucera N made of?
- Nickel 62 %, Chromium 24 %, Molybdenum 11 %, Silicon 1.6 %, Manganese 1 %.
- What is Mogucera N free of?
- Scheftner states: free of cadmium, beryllium and lead.
- How hard is Mogucera N?
- Vickers hardness is 245 HV 10, with a proof stress of 379 MPa and a tensile strength of 664 MPa.
- At what temperature is Mogucera N cast?
- Scheftner gives a casting temperature of 1450 - 1500 °C and a preheating temperature of 850 - 950 °C.
- Can Mogucera N be laser welded?
- Yes. Scheftner lists it as laser weldable.
- What is the thermal expansion of Mogucera N?
- 14.4 x 10⁻⁶K⁻¹ (20-600 °C).
- Which options are on this page?
- 1 kg (Ref. 139000); 25 g (Ref. 139050).
- Who makes Mogucera N?
- S&S Scheftner, a dental alloy and laboratory materials maker in Mainz, Germany.
Product
- Manufacturer
- S&S Scheftner
- Manufacturer #
- 139000
- Item code
- 119-0015
- UPC / Barcode
- 4260207850945
Catalog path
- Marketplace
- Laboratory
- Category
- Investment & Casting
- Subcategory
- Alloys & Metals
Ordering
- Status
- Special order
More from Alloys & Metals
Stocked in the same subcategory.
About nickel-chrome alloys
Nickel-chromium alloy, with or without beryllium, has been described as the most commonly used base metal alloy in clinical practice. Base metal alloys have higher yield and tensile strength and better resistance to creep than noble alloys.
A base metal alloy is an alloy composed of metals that are not noble. The FDA describes a base metal alloy as composed primarily of base metals such as nickel, chromium or cobalt, for cast or porcelain-fused-to-metal crown and bridge restorations (21 CFR 872.3710).
ISO 22674 sets the requirements and test methods for the metallic materials used to make dental restorations and appliances, with or without a ceramic veneer.
How cobalt-chrome alloys, nickel-chrome alloys and soldering supplies differ
- Cobalt-Chrome Alloys — Cobalt with up to 30 percent chromium; the framework alloy.
- Nickel-Chrome Alloys — Nickel-based; listed here as a ceramic alloy.
- Soldering & Torches — What joins cast parts: solder, flux, welding wire and torch tips.
What to look at when choosing an alloy
Use: ISO 22674 covers metallic materials recommended for use with a ceramic veneer, without one, or for both.
Handling: base metal alloys are technique sensitive in the laboratory, especially during casting and soldering.
Soldered joints: one study found no significant difference in joint strength or porosity between gas-oxygen torch and infrared soldering, or between gaps of 0.3 mm and 0.5 mm.
Sources: The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · FDA 21 CFR 872.3710, Base metal alloy · ISO 22674:2022, Dentistry — Metallic materials for fixed and removable restorations and appliances · Oxidation heat treatment and the porcelain to base metal alloy bond strength, 2022 (PMC9170503) · Infrared ray and gas torch soldering of Ni-Cr base metal alloy, 2010 (PMC3024500)







