
S&S Scheftner Mogucera C Cobalt-Chrome Bonding Alloy · 1 kg
Mogucera C is a cobalt-chrome-molybdenum casting alloy for porcelain-fused-to-metal work with conventional high-fusing ceramics. It is free of nickel and beryllium, and at 300 HV 10 it is easy to work and polish.
What Scheftner says about it
- Free of nickel, lead, beryllium and cadmium.
- Type 5 pursuant to DIN EN ISO 22674.
- High degree of purity
- Biocompatible and extremely corrosion resistant
- Very good alloy properties enable system-free Operation
- Very easy to polish and easy working characteristics due to a low hardness of 300 HV10
- A CTE of 14.1 ensures flexibility in ceramic selection and safe veneering
- Excellent metal-ceramic bonding, even without bonder
- An oxidation firing can be omitted
- Optimal conditions for laser welding
- Application flexibility and easy melting, no sparking
Composition
| Cobalt (Co) | 65 % |
|---|---|
| Chromium (Cr) | 28 % |
| Molybdenum (Mo) | 5 % |
| Manganese (Mn) | 1 % |
| C,Si | 1 % |
Technical data
| Proof stress (Rp 0.2) | 508 MPa |
|---|---|
| Ultimate tensile strength | 795 MPa |
| Elongation | 9% |
| Elastic modulus | 209 GPa |
| Vickers hardness | 300 HV 10 |
| Density | 8.3 g/cm³ |
| Melting range | 1370 - 1435 °C |
| Preheating temperature | 850 - 950 °C |
| Casting temperature | 1535 - 1590 °C |
| CTE (20-600 °C) | 14.1 x 10⁻⁶K⁻¹ |
| Laser weldable | Yes |
| Type (DIN EN ISO 22674) | 5 |
On this page
| 1 kg | Scheftner Ref. 138000 |
|---|---|
| 25 g | Scheftner Ref. 138050 |
Questions about this product
- What is Mogucera C used for?
- Mogucera C is a cobalt-chrome-molybdenum casting alloy for porcelain-fused-to-metal work with conventional high-fusing ceramics. It is free of nickel and beryllium, and at 300 HV 10 it is easy to work and polish.
- What is Mogucera C made of?
- Cobalt 65 %, Chromium 28 %, Molybdenum 5 %, Manganese 1 %, C,Si 1 %.
- What is Mogucera C free of?
- Scheftner states: free of nickel, lead, beryllium and cadmium.
- How hard is Mogucera C?
- Vickers hardness is 300 HV 10, with a proof stress of 508 MPa and a tensile strength of 795 MPa.
- At what temperature is Mogucera C cast?
- Scheftner gives a casting temperature of 1535 - 1590 °C and a preheating temperature of 850 - 950 °C.
- Can Mogucera C be laser welded?
- Yes. Scheftner lists it as laser weldable.
- What is the thermal expansion of Mogucera C?
- 14.1 x 10⁻⁶K⁻¹ (20-600 °C).
- Which options are on this page?
- 1 kg (Ref. 138000); 25 g (Ref. 138050).
- Who makes Mogucera C?
- S&S Scheftner, a dental alloy and laboratory materials maker in Mainz, Germany.
Product
- Manufacturer
- S&S Scheftner
- Manufacturer #
- 138000
- Item code
- 119-0013
- UPC / Barcode
- 4260207850938
Catalog path
- Marketplace
- Laboratory
- Category
- Investment & Casting
- Subcategory
- Alloys & Metals
Ordering
- Status
- Special order
More from Alloys & Metals
Stocked in the same subcategory.
About cobalt-chrome alloys
Cobalt chromium alloy is a low-density base metal dental casting alloy of 60 to 75 percent cobalt and up to 30 percent chromium. The chromium, by its passivation effect, ensures the corrosion resistance of the alloy. The alloys on this shelf are sold for partial denture frameworks and for metal-to-ceramic work.
A base metal alloy is an alloy composed of metals that are not noble. The FDA describes a base metal alloy as composed primarily of base metals such as nickel, chromium or cobalt, for cast or porcelain-fused-to-metal crown and bridge restorations (21 CFR 872.3710).
ISO 22674 sets the requirements and test methods for the metallic materials used to make dental restorations and appliances, with or without a ceramic veneer.
How cobalt-chrome alloys, nickel-chrome alloys and soldering supplies differ
- Cobalt-Chrome Alloys — Cobalt with up to 30 percent chromium; the framework alloy.
- Nickel-Chrome Alloys — Nickel-based; listed here as a ceramic alloy.
- Soldering & Torches — What joins cast parts: solder, flux, welding wire and torch tips.
What to look at when choosing an alloy
Use: ISO 22674 covers metallic materials recommended for use with a ceramic veneer, without one, or for both.
Handling: base metal alloys are technique sensitive in the laboratory, especially during casting and soldering.
Soldered joints: one study found no significant difference in joint strength or porosity between gas-oxygen torch and infrared soldering, or between gaps of 0.3 mm and 0.5 mm.
Sources: The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · FDA 21 CFR 872.3710, Base metal alloy · ISO 22674:2022, Dentistry — Metallic materials for fixed and removable restorations and appliances · Oxidation heat treatment and the porcelain to base metal alloy bond strength, 2022 (PMC9170503) · Infrared ray and gas torch soldering of Ni-Cr base metal alloy, 2010 (PMC3024500)







