
S&S Scheftner Modelstar S Cobalt-Chrome Partial Denture Alloy · 1 kg
Modelstar S is a cobalt-chrome casting alloy for the whole range of removable partial dentures, from clasp-retained frameworks to combined fixed-removable work. It is free of nickel and beryllium and is a Type 5 alloy.
What Scheftner says about it
- Free of nickel, beryllium, cadmium and lead.
- Type 5 pursuant DIN EN ISO 22674.
- High degree of purity
- Biocompatible and extremely corrosion resistant
- High wearing comfort due to low thermal conductivity
- Excellent for casting of 3D printed plastic parts
- Especially patient-friendly due to a low thermal conductivity
- System-free working due to very good alloy properties
- Universally applicable for clasp-retained prostheses and combined techniques
- Pleasant polishing properties and easy finishing
- Optimal conditions for laser welding
- Application flexibility and easy melting, no sparking
Composition
| Cobalt (Co) | 62.7 % |
|---|---|
| Chromium (Cr) | 29 % |
| Molybdenum (Mo) | 6 % |
| C,Fe,Si,Mn | 1 % |
Technical data
| Proof stress (Rp 0.2) | 510 - 600 MPa |
|---|---|
| Ultimate tensile strength | 770 - 780 MPa |
| Elongation | >3% |
| Elastic modulus | 200 - 230 GPa |
| Vickers hardness | 355 HV 10 |
| Density | 8.4 g/cm³ |
| Melting range | 1170 - 1390 °C |
| Preheating temperature | 850 - 950 °C |
| Casting temperature | 1490 - 1540 °C |
| Laser weldable | Yes |
| Type (DIN EN ISO 22674) | 5 |
On this page
| 1 kg | Scheftner Ref. 132100 |
|---|---|
| 250 g | Scheftner Ref. 132250 |
| 50 g | Scheftner Ref. 132150 |
| 25 g | Scheftner Ref. 132025 |
Questions about this product
- What is Modelstar S used for?
- Modelstar S is a cobalt-chrome casting alloy for the whole range of removable partial dentures, from clasp-retained frameworks to combined fixed-removable work. It is free of nickel and beryllium and is a Type 5 alloy.
- What is Modelstar S made of?
- Cobalt 62.7 %, Chromium 29 %, Molybdenum 6 %, C,Fe,Si,Mn 1 %.
- What is Modelstar S free of?
- Scheftner states: free of nickel, beryllium, cadmium and lead.
- How hard is Modelstar S?
- Vickers hardness is 355 HV 10, with a proof stress of 510 - 600 MPa and a tensile strength of 770 - 780 MPa.
- At what temperature is Modelstar S cast?
- Scheftner gives a casting temperature of 1490 - 1540 °C and a preheating temperature of 850 - 950 °C.
- Can Modelstar S be laser welded?
- Yes. Scheftner lists it as laser weldable.
- Which options are on this page?
- 1 kg (Ref. 132100); 250 g (Ref. 132250); 50 g (Ref. 132150); 25 g (Ref. 132025).
- Who makes Modelstar S?
- S&S Scheftner, a dental alloy and laboratory materials maker in Mainz, Germany.
Product
- Manufacturer
- S&S Scheftner
- Manufacturer #
- 132100
- Item code
- 119-0006
- UPC / Barcode
- 4260207850181
Catalog path
- Marketplace
- Laboratory
- Category
- Investment & Casting
- Subcategory
- Alloys & Metals
Ordering
- Status
- Special order
More from Alloys & Metals
Stocked in the same subcategory.
About cobalt-chrome alloys
Cobalt chromium alloy is a low-density base metal dental casting alloy of 60 to 75 percent cobalt and up to 30 percent chromium. The chromium, by its passivation effect, ensures the corrosion resistance of the alloy. The alloys on this shelf are sold for partial denture frameworks and for metal-to-ceramic work.
A base metal alloy is an alloy composed of metals that are not noble. The FDA describes a base metal alloy as composed primarily of base metals such as nickel, chromium or cobalt, for cast or porcelain-fused-to-metal crown and bridge restorations (21 CFR 872.3710).
ISO 22674 sets the requirements and test methods for the metallic materials used to make dental restorations and appliances, with or without a ceramic veneer.
How cobalt-chrome alloys, nickel-chrome alloys and soldering supplies differ
- Cobalt-Chrome Alloys — Cobalt with up to 30 percent chromium; the framework alloy.
- Nickel-Chrome Alloys — Nickel-based; listed here as a ceramic alloy.
- Soldering & Torches — What joins cast parts: solder, flux, welding wire and torch tips.
What to look at when choosing an alloy
Use: ISO 22674 covers metallic materials recommended for use with a ceramic veneer, without one, or for both.
Handling: base metal alloys are technique sensitive in the laboratory, especially during casting and soldering.
Soldered joints: one study found no significant difference in joint strength or porosity between gas-oxygen torch and infrared soldering, or between gaps of 0.3 mm and 0.5 mm.
Sources: The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · FDA 21 CFR 872.3710, Base metal alloy · ISO 22674:2022, Dentistry — Metallic materials for fixed and removable restorations and appliances · Oxidation heat treatment and the porcelain to base metal alloy bond strength, 2022 (PMC9170503) · Infrared ray and gas torch soldering of Ni-Cr base metal alloy, 2010 (PMC3024500)







