
S&S Scheftner Modelstar S Cobalt-Chrome Laser Melting Powder · Modelstar S Powder 16
Modelstar S Powder is the Modelstar S partial denture alloy as a cobalt-chrome powder for laser-melted frameworks. It meets DIN EN ISO 5832-4 and ASTM F75. Each pack is 5 kg.
What Scheftner says about it
- This guarantees the successful production of dentures with a well-proven dental material.
- Based on the proven Modelstar S partial denture alloy
- Compliant with DIN EN ISO 5832-4 and ASTM F75
Composition
| Cobalt (Co) | 61.5 % |
|---|---|
| Chromium (Cr) | 28.5 % |
| Molybdenum (Mo) | 6 % |
| C,Fe,Mn,Si | 1 % |
Technical data
| Proof stress (Rp 0.2) | 851 MPa |
|---|---|
| Ultimate tensile strength | 1100 MPa |
| Elongation | 14% |
| Vickers hardness | 340 HV 10 |
| Density | 8.4 g/cm³ |
| Melting range | 1490-1540 °C |
| CTE (25-500 °C) | 14.4 x 10⁻⁶K⁻¹ |
| Laser weldable | Yes |
| Type (DIN EN ISO 22674) | 5 |
Grain sizes and printers named by Scheftner
| Modelstar S Powder 16 (Ref. 132716) | 0-16 µm: PXS Dental, PXM Dental, DMP Dental 100, ProX DMP 200 |
|---|---|
| Modelstar S Powder 65 (Ref. 132165) | 65 µm: systems on request |
On this page
| Modelstar S Powder 16 | Scheftner Ref. 132716 |
|---|---|
| Modelstar S Powder 65 | Scheftner Ref. 132165 |
Questions about this product
- What is Modelstar S Powder used for?
- Modelstar S Powder is the Modelstar S partial denture alloy as a cobalt-chrome powder for laser-melted frameworks. It meets DIN EN ISO 5832-4 and ASTM F75. Each pack is 5 kg.
- What is Modelstar S Powder made of?
- Cobalt 61.5 %, Chromium 28.5 %, Molybdenum 6 %, C,Fe,Mn,Si 1 %.
- How hard is Modelstar S Powder?
- Vickers hardness is 340 HV 10, with a proof stress of 851 MPa and a tensile strength of 1100 MPa.
- Can Modelstar S Powder be laser welded?
- Yes. Scheftner lists it as laser weldable.
- What is the thermal expansion of Modelstar S Powder?
- 14.4 x 10⁻⁶K⁻¹ (25-500 °C).
- Which options are on this page?
- Modelstar S Powder 16 (Ref. 132716); Modelstar S Powder 65 (Ref. 132165).
- Who makes Modelstar S Powder?
- S&S Scheftner, a dental alloy and laboratory materials maker in Mainz, Germany.
Product
- Manufacturer
- S&S Scheftner
- Manufacturer #
- 132716
- Item code
- 119-0031
- UPC / Barcode
- 4260207853137
Catalog path
- Marketplace
- Laboratory
- Category
- Investment & Casting
- Subcategory
- Alloys & Metals
Ordering
- Status
- Special order
More from Alloys & Metals
Stocked in the same subcategory.
About cobalt-chrome alloys
Cobalt chromium alloy is a low-density base metal dental casting alloy of 60 to 75 percent cobalt and up to 30 percent chromium. The chromium, by its passivation effect, ensures the corrosion resistance of the alloy. The alloys on this shelf are sold for partial denture frameworks and for metal-to-ceramic work.
A base metal alloy is an alloy composed of metals that are not noble. The FDA describes a base metal alloy as composed primarily of base metals such as nickel, chromium or cobalt, for cast or porcelain-fused-to-metal crown and bridge restorations (21 CFR 872.3710).
ISO 22674 sets the requirements and test methods for the metallic materials used to make dental restorations and appliances, with or without a ceramic veneer.
How cobalt-chrome alloys, nickel-chrome alloys and soldering supplies differ
- Cobalt-Chrome Alloys — Cobalt with up to 30 percent chromium; the framework alloy.
- Nickel-Chrome Alloys — Nickel-based; listed here as a ceramic alloy.
- Soldering & Torches — What joins cast parts: solder, flux, welding wire and torch tips.
What to look at when choosing an alloy
Use: ISO 22674 covers metallic materials recommended for use with a ceramic veneer, without one, or for both.
Handling: base metal alloys are technique sensitive in the laboratory, especially during casting and soldering.
Soldered joints: one study found no significant difference in joint strength or porosity between gas-oxygen torch and infrared soldering, or between gaps of 0.3 mm and 0.5 mm.
Sources: The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · FDA 21 CFR 872.3710, Base metal alloy · ISO 22674:2022, Dentistry — Metallic materials for fixed and removable restorations and appliances · Oxidation heat treatment and the porcelain to base metal alloy bond strength, 2022 (PMC9170503) · Infrared ray and gas torch soldering of Ni-Cr base metal alloy, 2010 (PMC3024500)







