
Inlay-Star is a modelling wax made for inlay technique: dimensionally stable, low in contraction, and beige so it is easy on the eye. Working temperature is 53 °C. The tin is 70 g.
What Scheftner says about it
- Allows a pleasant modellation for users eyes
- Dimension stable and low contraction
- Working temperature: 53° C
On this page
| 70 g | Scheftner Ref. 521210 |
|---|
Questions about this product
- What is Inlay-Star used for?
- Inlay-Star is a modelling wax made for inlay technique: dimensionally stable, low in contraction, and beige so it is easy on the eye. Working temperature is 53 °C. The tin is 70 g.
- What is the working temperature of Inlay-Star?
- 53 °C.
- What size is the pack?
- 70 g (Ref. 521210).
- Who makes Inlay-Star?
- S&S Scheftner, a dental alloy and laboratory materials maker in Mainz, Germany.
Product
- Manufacturer
- S&S Scheftner
- Manufacturer #
- 521210
- Item code
- 119-0178
Catalog path
- Marketplace
- Laboratory
- Category
- Wax
- Subcategory
- Modeling & Carving Wax
Ordering
- Status
- Special order
More from Modeling & Carving Wax
Stocked in the same subcategory.
About modeling wax
Modeling wax on this shelf comes in tins and sets, in colours for the dentin, enamel and opaque parts of the pattern.
Modeling wax is a wax suitable for making patterns in the fabrication of restorations. Waxing is the contouring of a wax pattern, or of the wax base of a trial denture, into the desired form. The wax pattern sets the shape, size and contour of the restoration.
The FDA lists intraoral dental wax, used to construct the patterns from which metal prostheses are cast, as a Class I device (21 CFR 872.6890).
How modeling, carving, cervical and dipping wax and wax discs differ
- Modeling Wax — The wax that is added and shaped to build the pattern.
- Carving Wax — Sold as blocks and rods to be cut to shape.
- Cervical Wax — Used at the neck of the pattern, at or near the cemento-enamel junction.
- Dipping Wax — Kept molten in a bath; the die is dipped to make a coping pattern in one step.
- Wax Discs — A blank for the milling machine, not for hand waxing.
- Pattern Wire Wax — Ready-made wax shapes that are placed on the cast in place of free-hand waxing.
What to look at when choosing
Flow: under ANSI/ADA specification No. 4 a Type 1 wax may flow at most 1 percent at 37 °C, and Type 1 and Type 2 waxes must flow between 70 and 90 percent at 45 °C.
Shrinkage on cooling: cooling from 37 °C to 25 °C can contract inlay wax by up to 0.35 percent.
Distortion: a wax pattern can hold internal strains from the way it was worked, and it distorts when the strain relaxes. Time and temperature both make it worse, which is why patterns are generally invested immediately after they leave the die or cast.
Sources: The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · Distortion in Wax Patterns Fabricated Using Conventional and Electrical Heat Sources, 2023 (Cureus, PMC10388666) · FDA 21 CFR 872.6890, Intraoral dental wax · Ram et al. 2019, Microcomputed tomography to evaluate the fit of a restoration as compared to conventional replica technique (PMC6685334) · ISO 15854:2023, Casting and baseplate waxes







