
Scheftner Die Spacer is a quick-drying, abrasion-resistant varnish painted on the plaster die before wax-up to hold the space for the cement. Each colour is one thickness, from 4 µm (clear) to 15 µm (gold). Bottles are 25 ml.
What Scheftner says about it
- The plaster die is painted with the die spacer before wax-up.
- Available in various colors and thicknesses
- Steam cleaning resistant with particularly scratch-resistant and smooth surfacing properties
- Short curing time
- Thermal resistant
- The hardening of the gypsum surface takes place with Hardener without layering it.
- Use only Scheftner Thinner with the Die Spacer and the Hardener
On this page
| Gold, 15 µm | Scheftner Ref. 230205 |
|---|---|
| Silver, 13 µm | Scheftner Ref. 230206 |
| Red, 8 µm | Scheftner Ref. 230207 |
| Blue, 10 µm | Scheftner Ref. 230209 |
| Clear, 4 µm | Scheftner Ref. 230213 |
Questions about this product
- What is Scheftner Die Spacer used for?
- Scheftner Die Spacer is a quick-drying, abrasion-resistant varnish painted on the plaster die before wax-up to hold the space for the cement. Each colour is one thickness, from 4 µm (clear) to 15 µm (gold). Bottles are 25 ml.
- Which options are on this page?
- Gold, 15 µm (Ref. 230205); Silver, 13 µm (Ref. 230206); Red, 8 µm (Ref. 230207); Blue, 10 µm (Ref. 230209); Clear, 4 µm (Ref. 230213).
- Who makes Scheftner Die Spacer?
- S&S Scheftner, a dental alloy and laboratory materials maker in Mainz, Germany.
Product
- Manufacturer
- S&S Scheftner
- Manufacturer #
- 230207
- Item code
- 119-0155
Catalog path
- Marketplace
- Laboratory
- Category
- Gypsum & Model Materials
- Subcategory
- Model & Die Fabrication Materials
Ordering
- Status
- Special order
More from Model & Die Fabrication Materials
Stocked in the same subcategory.
About die spacers
Die spacer, also called die relief, is an agent painted on a die to provide space for the luting agent, the cement under the restoration.
These are the materials used on and around the cast and the die: duplicating materials, hardeners, die spacers, block-out materials, separating agents, adhesives and epoxy die materials. A die is the positive reproduction of the form of a prepared tooth.
How the materials on this shelf differ
- Duplicating & Die Silicone — A silicone that makes a flexible mould of the master model.
- Duplicating Materials & Flasks — Gels and silicones for copying a master model.
- Model Hardeners — Strengthens and hardens the surface of the stone.
- Die Spacers — Painted on the die to leave room for the cement.
- Blockout Materials — Fills undercuts and voids that the work must not enter.
- Die Lubricants & Separating Agents — A coating that keeps wax or another material from sticking to the die.
- Model Adhesives — A glue for model work.
- Epoxy Die Materials — A resin die material used in place of die stone.
What to look at when choosing
Hardener chemistry: in the study above the cyanoacrylate hardener gave the greatest improvement in surface hardness and compressive strength.
Duplicating material: the standard is written for materials that form flexible moulds of a properly blocked-out master model.
Pack: silicones are sold as base and activator, by weight; spacers, hardeners and lubricants by the bottle.
Sources: The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · ISO 14356:2024, Dentistry — Duplicating material · Effect of die hardeners and drying methods on Type IV dental stone, 2026 (Cureus, PMC13632340) · Mechanical and surface behavior of different die materials, 2017 (PMC5343681)







