
Long, thin sticks of green casting wax, for forming clasp arms on a partial denture wax-up. Pick the profile and size you need.
- Half-round profiles: flat on one side to sit on the model, rounded on the other
- Round profile: Thin Round is round all the way around, 1.5 mm across
- Sizes: half round, large half round 2.2 mm, thick half round 1.3 mm, medium half round 1.2 mm and thin half round
- Cut to length: lay a stick along the tooth, bend it to follow the contour and trim it
- Casting wax: tough, with low thermal expansion, for lost-wax casting
In the package: 1 box of green clasp wax sticks in the profile you pick.
How it's used: Lay a stick on the refractory model along the line of the clasp, press it into place, trim it to length and join it to the framework wax-up. Then sprue, invest and cast as usual.
For use by a dental professional.
Product
- Manufacturer
- RMH3 Dental
- Manufacturer #
- 705/1
- Item code
- 001-1023
Catalog path
- Marketplace
- Laboratory
- Category
- Wax
- Subcategory
- Pattern & Casting Wax
Ordering
- Status
- In stock
More from Pattern & Casting Wax
Stocked in the same subcategory.
About preformed wax patterns
Pattern wire wax here is preformed casting wax: clasps, bars, grids, retentions, profiles, pontics and sheets, smooth or stippled. A pattern is a form that is used to make a mold.
Casting wax is a composition of various waxes with the properties needed for making wax patterns that will be formed into metal castings. A wax pattern is a wax form that is the positive likeness of the object to be made. In the lost-wax technique the pattern is surrounded with a refractory slurry that sets, and is then removed by heat, leaving the mold into which metal or ceramic is cast.
The FDA lists intraoral dental wax, used to construct the patterns from which metal prostheses are cast, as a Class I device (21 CFR 872.6890). ISO 15854 is the standard for waxes used for dental casting by the lost-wax technique, including products intended for CAD/CAM milling.
How the waxes on this shelf differ
- Pattern Wire Wax — Ready-made wax shapes that are placed on the cast in place of free-hand waxing.
- Sprue Wire Wax — Wax wire that forms the channel for the molten metal.
- Modeling Wax — The wax that is added and shaped to build the pattern.
- Cervical Wax — Used at the neck of the pattern, at or near the cemento-enamel junction.
- Pattern Accessories — Sticky and adhesive wax, wax retentions, wire wax and measuring discs.
What to look at when choosing a pattern wax
Flow: under ANSI/ADA specification No. 4 a Type 1 wax may flow at most 1 percent at 37 °C, and Type 1 and Type 2 waxes must flow between 70 and 90 percent at 45 °C.
Thermal expansion: a rise of 20 °C expands inlay wax by 0.7 percent in length.
Distortion: a wax pattern can hold internal strains from the way it was worked, and it distorts when the strain relaxes. Time and temperature both make it worse, which is why patterns are generally invested immediately after they leave the die or cast.
Resin patterns: in one study resin pattern materials changed significantly less in dimension than inlay casting wax when stored for 1, 12 and 24 hours.
Sources: The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · FDA 21 CFR 872.6890, Intraoral dental wax · ISO 15854:2023, Casting and baseplate waxes · Distortion in Wax Patterns Fabricated Using Conventional and Electrical Heat Sources, 2023 (Cureus, PMC10388666) · Gopalan et al. 2018, Marginal adaptation of a thermoplastic resin, a light cured wax and an inlay casting wax (PMC5799966)







