
Dreve Odontosil Clear Silicone · 50 Shore A · 2 x 50 ml Cartridges
Clear, transparent addition-curing silicone for making orthodontic elasto-positioners, with a final hardness of 50 or 60 Shore A. It cures at room temperature, so it can be applied from the double cartridge straight onto the set-up model as well as by the indirect flask method. Working time 5 minutes; removable after 30 minutes. The pack of 2 cartridges comes with 12 mixing tips.
For use by a dental professional.
Product
- Manufacturer
- Dreve
- Manufacturer #
- D5038150
- Item code
- 120-0244
Catalog path
- Marketplace
- Laboratory
- Category
- Gypsum & Model Materials
- Subcategory
- Model & Die Fabrication Materials
Ordering
- Status
- Special order
More from Model & Die Fabrication Materials
Stocked in the same subcategory.
About duplicating and die silicone
Duplicating and die silicone makes the flexible mould in which a refractory investment copy of a blocked-out master model is produced. ISO 14356 sets the requirements and tests for them.
These are the materials used on and around the cast and the die: duplicating materials, hardeners, die spacers, block-out materials, separating agents, adhesives and epoxy die materials. A die is the positive reproduction of the form of a prepared tooth.
How the materials on this shelf differ
- Duplicating & Die Silicone — A silicone that makes a flexible mould of the master model.
- Duplicating Materials & Flasks — Gels and silicones for copying a master model.
- Model Hardeners — Strengthens and hardens the surface of the stone.
- Die Spacers — Painted on the die to leave room for the cement.
- Blockout Materials — Fills undercuts and voids that the work must not enter.
- Die Lubricants & Separating Agents — A coating that keeps wax or another material from sticking to the die.
- Model Adhesives — A glue for model work.
- Epoxy Die Materials — A resin die material used in place of die stone.
What to look at when choosing
Hardener chemistry: in the study above the cyanoacrylate hardener gave the greatest improvement in surface hardness and compressive strength.
Duplicating material: the standard is written for materials that form flexible moulds of a properly blocked-out master model.
Pack: silicones are sold as base and activator, by weight; spacers, hardeners and lubricants by the bottle.
Sources: The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · ISO 14356:2024, Dentistry — Duplicating material · Effect of die hardeners and drying methods on Type IV dental stone, 2026 (Cureus, PMC13632340) · Mechanical and surface behavior of different die materials, 2017 (PMC5343681)







