
Dreve Dublisil Duplicating Silicone · 15 · 2 x 0.85 l Bottles (850 ml each)
Duplicating silicone in six types; the number is the final hardness in Shore A. Dublisil 15 is thin-flowing, very flexible and easy to deflask. Dublisil 20 is the universal type, suited to stable duplicating forms for attachment and milling work. Dublisil 22 plus has high tear resistance for trouble-free deflasking. Dublisil 30 is the hardest, for high-precision work such as telescope and attachment cases, and can also be used without a flask. Working time is 6 minutes (22 plus: 5 minutes) and the mould can be removed after 25 minutes; the speed types work in 3 minutes and can be removed after 10.
For use by a dental professional.
Product
- Manufacturer
- Dreve
- Manufacturer #
- D4801
- Item code
- 120-0209
Catalog path
- Marketplace
- Laboratory
- Category
- Gypsum & Model Materials
- Subcategory
- Model & Die Fabrication Materials
Ordering
- Status
- Special order
More from Model & Die Fabrication Materials
Stocked in the same subcategory.
About duplicating and die silicone
Duplicating and die silicone makes the flexible mould in which a refractory investment copy of a blocked-out master model is produced. ISO 14356 sets the requirements and tests for them.
These are the materials used on and around the cast and the die: duplicating materials, hardeners, die spacers, block-out materials, separating agents, adhesives and epoxy die materials. A die is the positive reproduction of the form of a prepared tooth.
How the materials on this shelf differ
- Duplicating & Die Silicone — A silicone that makes a flexible mould of the master model.
- Duplicating Materials & Flasks — Gels and silicones for copying a master model.
- Model Hardeners — Strengthens and hardens the surface of the stone.
- Die Spacers — Painted on the die to leave room for the cement.
- Blockout Materials — Fills undercuts and voids that the work must not enter.
- Die Lubricants & Separating Agents — A coating that keeps wax or another material from sticking to the die.
- Model Adhesives — A glue for model work.
- Epoxy Die Materials — A resin die material used in place of die stone.
What to look at when choosing
Hardener chemistry: in the study above the cyanoacrylate hardener gave the greatest improvement in surface hardness and compressive strength.
Duplicating material: the standard is written for materials that form flexible moulds of a properly blocked-out master model.
Pack: silicones are sold as base and activator, by weight; spacers, hardeners and lubricants by the bottle.
Sources: The Glossary of Prosthodontic Terms, 9th edition (J Prosthet Dent 2017) · ISO 14356:2024, Dentistry — Duplicating material · Effect of die hardeners and drying methods on Type IV dental stone, 2026 (Cureus, PMC13632340) · Mechanical and surface behavior of different die materials, 2017 (PMC5343681)







