{"product_id":"detax-freeprint-tryin-385-functional-try-in-resin","title":"Detax Freeprint Tryin 385 Functional Try-In Resin, A2","description":"\u003cp\u003eFreeprint® tryin 385 is Detax's light-curing resin for 3D-printed functional try-ins. Detax indicates it as a monolithic try-in denture: one printed piece, in a tooth-coloured shade, used to verify fit, function, occlusion, bite registration and esthetics before the definitive complete or partial denture is made. It contains no MMA and no THF-MA.\u003c\/p\u003e\u003ch3\u003eWhat it is used for\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMonolithic functional try-ins for complete and partial dentures\u003c\/li\u003e\n\u003cli\u003eChecking fit, function and occlusion of a digitally designed tooth set-up\u003c\/li\u003e\n\u003cli\u003eBite registration and esthetic approval with the patient\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy labs choose it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne printed piece instead of a wax set-up, so the try-in comes off the printer ready to seat\u003c\/li\u003e\n\u003cli\u003eFlexural strength above 100 MPa and a flexural modulus above 2200 MPa to ISO 178 — it survives handling and seating\u003c\/li\u003e\n\u003cli\u003eTooth-coloured shade for a realistic esthetic preview\u003c\/li\u003e\n\u003cli\u003eLow material use and easy processing; optional mechanical polish with rotating brushes and prepolishing paste\u003c\/li\u003e\n\u003cli\u003eMMA- and THF-MA-free\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDetails\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShade: A2 (Detax also makes A1, article 04094, and A3, article 04105)\u003c\/li\u003e\n\u003cli\u003eDetax article number: 04101 — Freeprint tryin A2, 1000 g bottle\u003c\/li\u003e\n\u003cli\u003eWavelength: 385 nm DLP, with a Detax parameter set also published for the 405 nm Formlabs Form 4B\u003c\/li\u003e\n\u003cli\u003eRegulatory: FDA Class I, FDA listing D280112; EU medical device Class IIa; Health Canada Class I licence\u003c\/li\u003e\n\u003cli\u003eHardness above 85 Shore D; depth of cure above 3 mm; viscosity 850–1750 mPas; water sorption under 32 µg\/cm³\u003c\/li\u003e\n\u003cli\u003eBiocompatibility fulfilled to ISO 10993-1; MR Safe per Detax\u003c\/li\u003e\n\u003cli\u003ePrinting: 100 µm layers. Detax limits the resin to two days in the printer vat, or a maximum of 10 print cycles\u003c\/li\u003e\n\u003cli\u003ePost-processing: clean twice with isopropyl alcohol of at least 98 % purity, then post-cure in a validated curing unit\u003c\/li\u003e\n\u003cli\u003eStorage: dry, 15–28 °C \/ 59–82 °F, protected from light\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdetails class=\"faq\"\u003e\u003csummary\u003eQuestions about this product\u003c\/summary\u003e\u003cdl\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cdt\u003eWhat is Freeprint tryin used for?\u003c\/dt\u003e\n\u003cdd\u003eDetax indicates it as a monolithic try-in denture. The material is used to fabricate functional try-ins that let you control occlusion, bite registration and esthetics before the definitive complete or partial denture is made.\u003c\/dd\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cdt\u003eWhat shades does Detax offer for Freeprint tryin?\u003c\/dt\u003e\n\u003cdd\u003eDetax lists three shades — A1 (article 04094), A2 (04101) and A3 (04105) — each in a 1000 g bottle. This page is the A2 shade.\u003c\/dd\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cdt\u003eWhat is the regulatory status of Freeprint tryin in the USA?\u003c\/dt\u003e\n\u003cdd\u003eDetax lists it in its 3D US Guide as an FDA Class I device under FDA listing number D280112. In the EU it is a Class IIa medical device, and it holds a Health Canada Class I licence. Detax does not state a 510(k) clearance for this material.\u003c\/dd\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cdt\u003eWhich printers does Detax validate for Freeprint tryin?\u003c\/dt\u003e\n\u003cdd\u003eDetax publishes parameter sets for Asiga Max, Max 2, Pico 2, PRO 2, PRO 4K and Ultra, Formlabs Form 4B, Microlay Versus, Miicraft Ultra Series, Rapidshape D10+ to D40+, Pro20 and Pro30, and Way2Production SolFlex and SolLab Series. Detax states the material is only approved on the devices named in its instructions for use.\u003c\/dd\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cdt\u003eHow long can Freeprint tryin stay in the printer vat?\u003c\/dt\u003e\n\u003cdd\u003eDetax allows a maximum of two days in the vat, or 10 print cycles, whichever comes first. Resin left in the vat must never be poured back into the bottle.\u003c\/dd\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cdt\u003eDoes a printed try-in need to be polished?\u003c\/dt\u003e\n\u003cdd\u003ePolishing is optional. Detax says you may prepolish mechanically with rotating brushes and prepolishing paste, then bring it to high gloss with buffing wheels and a high-shine composite polishing paste.\u003c\/dd\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cdt\u003eWhat layer thickness does Detax specify for Freeprint tryin?\u003c\/dt\u003e\n\u003cdd\u003eDetax specifies 100 µm layers across every validated printer, with a recommended build orientation of 0 to 90 degrees.\u003c\/dd\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cdt\u003eWhat is the difference between Freeprint tryin and Freeprint denture?\u003c\/dt\u003e\n\u003cdd\u003eFreeprint tryin prints the whole try-in as one tooth-coloured monolithic piece for checking fit and occlusion. Freeprint denture, denture impact and denture flex are the denture base resins in gum shades, used for the definitive prosthesis and cleared by the FDA as Class II devices.\u003c\/dd\u003e\n\u003c\/div\u003e\n\u003c\/dl\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is Freeprint tryin used for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Detax indicates it as a monolithic try-in denture. The material is used to fabricate functional try-ins that let you control occlusion, bite registration and esthetics before the definitive complete or partial denture is made.\"}},{\"@type\":\"Question\",\"name\":\"What shades does Detax offer for Freeprint tryin?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Detax lists three shades — A1 (article 04094), A2 (04101) and A3 (04105) — each in a 1000 g bottle. This page is the A2 shade.\"}},{\"@type\":\"Question\",\"name\":\"What is the regulatory status of Freeprint tryin in the USA?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Detax lists it in its 3D US Guide as an FDA Class I device under FDA listing number D280112. In the EU it is a Class IIa medical device, and it holds a Health Canada Class I licence. Detax does not state a 510(k) clearance for this material.\"}},{\"@type\":\"Question\",\"name\":\"Which printers does Detax validate for Freeprint tryin?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Detax publishes parameter sets for Asiga Max, Max 2, Pico 2, PRO 2, PRO 4K and Ultra, Formlabs Form 4B, Microlay Versus, Miicraft Ultra Series, Rapidshape D10+ to D40+, Pro20 and Pro30, and Way2Production SolFlex and SolLab Series. Detax states the material is only approved on the devices named in its instructions for use.\"}},{\"@type\":\"Question\",\"name\":\"How long can Freeprint tryin stay in the printer vat?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Detax allows a maximum of two days in the vat, or 10 print cycles, whichever comes first. Resin left in the vat must never be poured back into the bottle.\"}},{\"@type\":\"Question\",\"name\":\"Does a printed try-in need to be polished?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Polishing is optional. Detax says you may prepolish mechanically with rotating brushes and prepolishing paste, then bring it to high gloss with buffing wheels and a high-shine composite polishing paste.\"}},{\"@type\":\"Question\",\"name\":\"What layer thickness does Detax specify for Freeprint tryin?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Detax specifies 100 µm layers across every validated printer, with a recommended build orientation of 0 to 90 degrees.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference between Freeprint tryin and Freeprint denture?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Freeprint tryin prints the whole try-in as one tooth-coloured monolithic piece for checking fit and occlusion. Freeprint denture, denture impact and denture flex are the denture base resins in gum shades, used for the definitive prosthesis and cleared by the FDA as Class II devices.\"}}]}\u003c\/script\u003e","brand":"Detax","offers":[{"title":"1 kg","offer_id":68735907234073,"sku":"118-0022","price":278.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/4754\/7161\/files\/detax_04101_118-0022_custom-1790341425710.jpg?v=1794929456","url":"https:\/\/rmh3digital.com\/products\/detax-freeprint-tryin-385-functional-try-in-resin","provider":"RMH3 Dental Supply","version":"1.0","type":"link"}