{"product_id":"detax-freeprint-crown-permanent-crown-resin","title":"Detax Freeprint Crown Permanent Crown Resin","description":"\u003cp\u003eFreeprint® crown 385 is Detax's light-curing resin for 3D-printed permanent restorations. Detax states that the material is indicated as an indirect restorative for anterior and posterior teeth — permanent single crowns, inlays, onlays, veneers, denture teeth and long-term temporary bridges of up to three units with one pontic. The shade range follows the VITA classical guide, and translucency and opacity are matched shade by shade.\u003c\/p\u003e\u003ch3\u003eWhat it is used for\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePermanent single crowns, anterior and posterior, including occlusal surfaces\u003c\/li\u003e\n\u003cli\u003eInlays, onlays and veneers\u003c\/li\u003e\n\u003cli\u003eDenture teeth for dental prostheses — bonded to a printed Freeprint denture, denture impact or denture flex base in the green state, with no separate bonding agent\u003c\/li\u003e\n\u003cli\u003eLong-term temporary bridges, up to three units with an intermediate pontic\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy labs choose it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNine shades close to the VITA classical guide, each with its own translucency and opacity setting\u003c\/li\u003e\n\u003cli\u003eWater absorption under 40 µg\/mm³, which Detax links to its resistance to discoloration over time\u003c\/li\u003e\n\u003cli\u003eFlexural strength above 100 MPa and a flexural modulus above 2800 MPa to ISO 10477\u003c\/li\u003e\n\u003cli\u003eDetax states a wearing period of ten years or more for permanent crowns\u003c\/li\u003e\n\u003cli\u003eCleared by the FDA as a Class II device under 510(k) K222877\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eShades and bottle sizes\u003c\/h3\u003e\u003cp\u003eEight shades, each in a 500 g and a 1 kg bottle — pick the shade and size above. The number is the Detax article number.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eShade\u003c\/th\u003e\n\u003cth\u003e500 g\u003c\/th\u003e\n\u003cth\u003e1 kg\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA1\u003c\/td\u003e\n\u003ctd\u003e04365\u003c\/td\u003e\n\u003ctd\u003e04364\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA2\u003c\/td\u003e\n\u003ctd\u003e04367\u003c\/td\u003e\n\u003ctd\u003e04366\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA3\u003c\/td\u003e\n\u003ctd\u003e04369\u003c\/td\u003e\n\u003ctd\u003e04368\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB1\u003c\/td\u003e\n\u003ctd\u003e04371\u003c\/td\u003e\n\u003ctd\u003e04370\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB3\u003c\/td\u003e\n\u003ctd\u003e04373\u003c\/td\u003e\n\u003ctd\u003e04372\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC2\u003c\/td\u003e\n\u003ctd\u003e04377\u003c\/td\u003e\n\u003ctd\u003e04376\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD3\u003c\/td\u003e\n\u003ctd\u003e04379\u003c\/td\u003e\n\u003ctd\u003e04378\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBL\u003c\/td\u003e\n\u003ctd\u003e04375\u003c\/td\u003e\n\u003ctd\u003e04374\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eDetails\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWavelength: 385 nm DLP, with Detax parameter sets also published for 388 nm and 405 nm printers\u003c\/li\u003e\n\u003cli\u003eRegulatory: FDA Class II, 510(k) K222877; EU MDR Class IIa; Health Canada Class III licence. Caution — US federal law restricts this device to sale by or on the order of a dentist\u003c\/li\u003e\n\u003cli\u003eBiocompatibility fulfilled to ISO 10993-1; MR Safe per Detax\u003c\/li\u003e\n\u003cli\u003eBottle sizes: 500 g and 1 kg\u003c\/li\u003e\n\u003cli\u003ePrinting: 50 µm layers; minimum wall thickness 1.5 mm occlusal and circumferential, 1.0 mm cervical; connector cross-section at least 16 mm² for pontics\u003c\/li\u003e\n\u003cli\u003eComposition: (meth)acrylics, phosphine oxides and silanized dental glass; 20–40 % inorganic filler by mass at 1.5 µm particle size; viscosity 1400–2200 mPas\u003c\/li\u003e\n\u003cli\u003ePost-processing: clean with isopropyl alcohol of at least 98 % purity, then post-cure in a validated curing unit; biocompatibility is only guaranteed after complete polymerisation\u003c\/li\u003e\n\u003cli\u003eStorage: dry, 15–28 °C \/ 59–82 °F, protected from light\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdetails class=\"faq\"\u003e\u003csummary\u003eQuestions about this product\u003c\/summary\u003e\u003cdl\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cdt\u003eIs Freeprint crown approved for permanent crowns or only temporaries?\u003c\/dt\u003e\n\u003cdd\u003eDetax indicates it for both. The US instructions for use describe it as an indirect restorative for temporary or permanent restorations — crowns and bridges, inlays, onlays, veneers and full crown restorations — and the product page states a wearing period of ten years or more for permanent crowns.\u003c\/dd\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cdt\u003eWhat shades does Detax make Freeprint crown in?\u003c\/dt\u003e\n\u003cdd\u003eDetax lists nine shades close to the VITA classical guide: A1, A2, A3, A3.5, B1, B3, C2, D3 and BL. Each shade comes in a 500 g and a 1 kg bottle.\u003c\/dd\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cdt\u003eIs Freeprint crown FDA cleared?\u003c\/dt\u003e\n\u003cdd\u003eYes. Detax lists Freeprint crown in its 3D US Guide as an FDA Class II device under 510(k) number K222877. It is also EU MDR Class IIa and holds a Health Canada Class III licence. US federal law restricts the device to sale by or on the order of a dentist.\u003c\/dd\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cdt\u003eWhich printers does Detax validate for Freeprint crown?\u003c\/dt\u003e\n\u003cdd\u003eDetax publishes validated parameter sets for Asiga Max, Max 2, PRO 4K and Ultra, Aidite Cameo CPD-100, Formlabs Form 4B and Form 4BL, Heygears UltraCraft A2D HD, Ivoclar PrograPrint PR5, LuxCreo FastPrint.io and iLux Pro Dental, Microlay Versus, Rapidshape ONE, D10+ to D40+, PRO20 and PRO30, Rayshape Edge E2 and Edge Mini, Shining 3D AccuFab CEL and L4D, and W2P SolFlex 250 UHD. Detax states the material is only approved on the devices named in its instructions for use.\u003c\/dd\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cdt\u003eWhat layer thickness and wall thickness does Detax specify?\u003c\/dt\u003e\n\u003cdd\u003eDetax specifies 50 µm layers, a minimum wall thickness of 1.5 mm occlusally and circumferentially and 1.0 mm cervically, and a connector cross-section of at least 16 mm² for pontics.\u003c\/dd\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cdt\u003eHow do I bond printed denture teeth to a printed denture base?\u003c\/dt\u003e\n\u003cdd\u003eDetax says to leave the cleaned base and teeth in the green, uncured state, seat the teeth in the printed sockets, apply liquid Freeprint denture, denture impact or denture flex into the sockets with a brush or syringe, flash 400 times under nitrogen in an Otoflash G171, then post-cure the assembled denture with 2 x 1800 flashes under nitrogen.\u003c\/dd\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cdt\u003eHow should Freeprint crown be stored and how long can it stay in the vat?\u003c\/dt\u003e\n\u003cdd\u003eDetax says to store it dry at 15–28 °C \/ 59–82 °F and protected from light, because even slight light exposure can start polymerisation. The resin may stay in the printer vat for a maximum of 14 days or 10 print cycles, and resin taken out of the vat must never be poured back into the bottle.\u003c\/dd\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cdt\u003eWhat is the difference between Freeprint crown and Freeprint temp?\u003c\/dt\u003e\n\u003cdd\u003eFreeprint crown is Detax's permanent restorative, cleared as a Class II device, with a flexural modulus above 2800 MPa and nine shades. Freeprint temp is the temporary material: Detax indicates it for restorations worn less than 30 days in the mouth and offers it in shades A1, A2 and A3.\u003c\/dd\u003e\n\u003c\/div\u003e\n\u003c\/dl\u003e\u003c\/details\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is Freeprint crown approved for permanent crowns or only temporaries?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Detax indicates it for both. The US instructions for use describe it as an indirect restorative for temporary or permanent restorations — crowns and bridges, inlays, onlays, veneers and full crown restorations — and the product page states a wearing period of ten years or more for permanent crowns.\"}},{\"@type\":\"Question\",\"name\":\"What shades does Detax make Freeprint crown in?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Detax lists nine shades close to the VITA classical guide: A1, A2, A3, A3.5, B1, B3, C2, D3 and BL. Each shade comes in a 500 g and a 1 kg bottle.\"}},{\"@type\":\"Question\",\"name\":\"Is Freeprint crown FDA cleared?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Detax lists Freeprint crown in its 3D US Guide as an FDA Class II device under 510(k) number K222877. It is also EU MDR Class IIa and holds a Health Canada Class III licence. US federal law restricts the device to sale by or on the order of a dentist.\"}},{\"@type\":\"Question\",\"name\":\"Which printers does Detax validate for Freeprint crown?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Detax publishes validated parameter sets for Asiga Max, Max 2, PRO 4K and Ultra, Aidite Cameo CPD-100, Formlabs Form 4B and Form 4BL, Heygears UltraCraft A2D HD, Ivoclar PrograPrint PR5, LuxCreo FastPrint.io and iLux Pro Dental, Microlay Versus, Rapidshape ONE, D10+ to D40+, PRO20 and PRO30, Rayshape Edge E2 and Edge Mini, Shining 3D AccuFab CEL and L4D, and W2P SolFlex 250 UHD. Detax states the material is only approved on the devices named in its instructions for use.\"}},{\"@type\":\"Question\",\"name\":\"What layer thickness and wall thickness does Detax specify?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Detax specifies 50 µm layers, a minimum wall thickness of 1.5 mm occlusally and circumferentially and 1.0 mm cervically, and a connector cross-section of at least 16 mm² for pontics.\"}},{\"@type\":\"Question\",\"name\":\"How do I bond printed denture teeth to a printed denture base?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Detax says to leave the cleaned base and teeth in the green, uncured state, seat the teeth in the printed sockets, apply liquid Freeprint denture, denture impact or denture flex into the sockets with a brush or syringe, flash 400 times under nitrogen in an Otoflash G171, then post-cure the assembled denture with 2 x 1800 flashes under nitrogen.\"}},{\"@type\":\"Question\",\"name\":\"How should Freeprint crown be stored and how long can it stay in the vat?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Detax says to store it dry at 15–28 °C \/ 59–82 °F and protected from light, because even slight light exposure can start polymerisation. The resin may stay in the printer vat for a maximum of 14 days or 10 print cycles, and resin taken out of the vat must never be poured back into the bottle.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference between Freeprint crown and Freeprint temp?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Freeprint crown is Detax's permanent restorative, cleared as a Class II device, with a flexural modulus above 2800 MPa and nine shades. Freeprint temp is the temporary material: Detax indicates it for restorations worn less than 30 days in the mouth and offers it in shades A1, A2 and A3.\"}}]}\u003c\/script\u003e","brand":"Detax","offers":[{"title":"A1 \/ 1 kg","offer_id":68735898943769,"sku":"118-0002","price":634.0,"currency_code":"USD","in_stock":true},{"title":"A1 \/ 500 g","offer_id":68735898911001,"sku":"118-0001","price":388.0,"currency_code":"USD","in_stock":false},{"title":"A2 \/ 1 kg","offer_id":68735899009305,"sku":"118-0004","price":634.0,"currency_code":"USD","in_stock":true},{"title":"A2 \/ 500 g","offer_id":68735898976537,"sku":"118-0003","price":388.0,"currency_code":"USD","in_stock":true},{"title":"A3 \/ 1 kg","offer_id":68735899074841,"sku":"118-0006","price":634.0,"currency_code":"USD","in_stock":true},{"title":"A3 \/ 500 g","offer_id":68735899042073,"sku":"118-0005","price":388.0,"currency_code":"USD","in_stock":true},{"title":"B1 \/ 1 kg","offer_id":68735899140377,"sku":"118-0008","price":634.0,"currency_code":"USD","in_stock":true},{"title":"B1 \/ 500 g","offer_id":68735899107609,"sku":"118-0007","price":388.0,"currency_code":"USD","in_stock":true},{"title":"B3 \/ 1 kg","offer_id":68735899205913,"sku":"118-0034","price":634.0,"currency_code":"USD","in_stock":false},{"title":"B3 \/ 500 g","offer_id":68735899173145,"sku":"118-0035","price":388.0,"currency_code":"USD","in_stock":false},{"title":"C2 \/ 1 kg","offer_id":68735899271449,"sku":"118-0036","price":634.0,"currency_code":"USD","in_stock":false},{"title":"C2 \/ 500 g","offer_id":68735899238681,"sku":"118-0037","price":388.0,"currency_code":"USD","in_stock":false},{"title":"D3 \/ 1 kg","offer_id":68735899336985,"sku":"118-0038","price":634.0,"currency_code":"USD","in_stock":false},{"title":"D3 \/ 500 g","offer_id":68735899304217,"sku":"118-0039","price":388.0,"currency_code":"USD","in_stock":false},{"title":"BL \/ 1 kg","offer_id":68735899402521,"sku":"118-0010","price":634.0,"currency_code":"USD","in_stock":false},{"title":"BL \/ 500 g","offer_id":68735899369753,"sku":"118-0009","price":388.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0830\/4754\/7161\/files\/detax_04365_118-0001_custom-1784648711888.png?v=1794929290","url":"https:\/\/rmh3digital.com\/products\/detax-freeprint-crown-permanent-crown-resin","provider":"RMH3 Dental Supply","version":"1.0","type":"link"}